-When setting seconds, pressing S1 or S2 while the second digits count between 30 to 59 will reset the second digits to 00 and 1 will be added to the minute digits.
-Year can be set from 1990 to 2049.
-When setting 12/24HR, press S1 or S2 to toggle
-When setting
-After all adjustments are completed, press S4 to exit the setting mode.
Remarks:
1.Normal Time mode (T1) and Dual Time mode (T2) count up individually with the same second.
2.When Normal Time mode (T1) is displayed, press and hold S2 for not exceeding 2 seconds can view the dual time without changing the mode.
3.When Dual Time mode (T2) is displayed, press and hold S2 for not exceeding 2 seconds can view the normal time without changing the mode.
4.If there is no button operation for about 2 minutes in setting mode, the watch will automatically return back to Normal Time mode or Dual Time mode respectively.
5.To exit Time mode, press S3 will enter mode selection display.
(F) HOW TO USE THE TIMERS
S4 | S1 | S4 | S1 |
S3 | S2 | S3 | S2 |
| S5 |
| S5 |
TMR1 OF “LOOP” TIMER | COUNT DOWN STOP TIMER |
-At mode selection display, press S4 to enter Timer mode, mode prompt “TIMER” will be displayed for 2 seconds first.
-Press S2 to select TMR1 to TMR5 of “Loop” timer or count down stop timer.
(1) “Loop” timer
-Press and hold S4 for 3 seconds (“SET HOLD” displayed) to enter setting mode. The second digits start flashing.
-Press S1 (forward) or S2 (reverse) to adjust the flashing digits. Press and hold S1 or S2 for fast setting.
-Press S3 to select the next digits or timer number for setting. The sequence is shown as follow:
S3
|
|
|
|
|
|
|
SECOND | S3 | S3 | S3 |
|
| |
| ||||||
MINUTE | HOUR | TIMER NUMBER |
-After all adjustments are completed, press S4 to exit the setting mode.
-Press S2 to select TMR1 to TMR5 as the beginning of the count down process.
-Press S1 to start the timer. The count down process will run through all set timers (TMR1 to TMR5) in loop structure and when it pass the beginning again, repetition number (shown at the bottom row of the display) will increase by 1.
-When the timer is counting, press S1 can toggle between the display formats of timer.
S1 | PRESET TIME |
COUNT DOWN TIME
-Press S2 to stop the timer, or the timer will stop automatically when repetition number reaches 30. Then press S4 to reload preset timer time, or press and hold S2 for 2 seconds (“RST HOLD” displayed) to reset all timers (TMR1 to TMR5) to zeros. In both cases, repetition number is reset to zeros.
(2) Count down stop timer
-Press and hold S4 for 3 seconds (“SET HOLD” displayed) to enter setting mode. The second digits start flashing.
-Press S1 (forward) or S2 (reverse) to adjust the flashing digits. Press and hold S1 or S2 for fast setting.
-Press S3 to select the next digits for setting. The sequence is shown as follow:
3