3Power on the source component you wish to view.
4 Power on the WirelessHD transmitter.
5 Switching the WirelessHD transmitter to the correct HDMI input:
Note: When switching between the four HDMI ports, it is normal for the switching to take an average of about 10 seconds (sometimes up to 20 seconds; the further the WirelessHD transmitter and receiver are from each other, the longer the switching will take). The WirelessHD receiver will output a black video screen at 480p (720 x 480) resolution @ 60Hz with no audio during the switching process.
•The WirelessHD transmitter may automatically switch to the HDMI port of the source device that is most recently powered on (depending on the type of source component that is connected). If it does not automatically switch to the correct HDMI port, or you want to switch to a different HDMI port for another source device, follow one of the following steps:
•Press the corresponding button on the included remote control (HDMI
•If you have misplaced the remote control, or do not wish to use it, you can also quickly press the HDMI SW button on the back of the WirelessHD transmitter to sequentially toggle through the four HDMI ports.
Note: Be sure to quickly press the HDMI SW button for less than one second to switch HDMI ports. If you hold this button down for three seconds or more, the transmitter will search for a different receiver and you may lose the connection between the transmitter and receiver. If this happens, press and hold the HDMI SW button again for at least three seconds to
•If your TV or projector and source devices support CEC (consumer electronics control), you will see the available connected devices on the Input screen of the TV or projector. Simply select the device you wish to view by selecting it from this
14