
Caution: Do not mix battery types. Do not use old and new batteries together. Remove all batteries if the unit is not going to be used for a long period of time.
1With the speaker AC adapter disconnected, open the battery cover.
2Install eight (8) C size batteries taking care to follow the battery polarity markings on the battery compartment.
3For
4Replace the battery cover. When charging (speakers on or off), the LED flashes green slowly. When charging is complete, the LED lights solid green. If the LED flashes green quickly, the charger cannot charge the batteries. Replace the batteries with new ones. Full battery charging can take up to 24 hours.
Warning: Do not try to recharge alkaline batteries. Use C size NiMH rechargeable batteries. Failure to do so may damage the speakers or cause a fire. The speaker will try to charge batteries if the battery switch is set to NiMH.
Note: Rechargeable batteries can be recharged with the speakers on or off.
Caution: To avoid the risk of electric shock and fire, and to prevent damage, locate the sender and speakers with no obstructions in front of the ventilation holes.
Caution: Do not use the
Note: if you need to mount the speakers, make sure that the left and right speakers are switched to the correct left, right, or mono setting for speaker output sound.
Note: For best performance, the sender LED should face the general direction of the area where you plan to place the speakers.
14