Maintaining your system
Use a soft cloth dampened with a weak solution of mild detergent and water. Dry the apparatus immediately afterwards with a clean cloth. Do not use abrasive cloth, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.
Cautions:
•Do not cover the ventilation openings with items, such as newspapers, table clothes, and curtains.
•If the power cord is damaged, it must be repaired by a qualified repairer.
Note:
•If the
Troubleshooting
Read this User Guide carefully before using your digital wireless speakers. Check this list for a possible troubleshooting solution before calling for service.
Problem | Solution |
|
|
No sound | • Make sure the sender AC adapter is connected to the sender, and either the |
| speaker AC adapter is connected or fresh or charged batteries are installed |
| in the speakers. |
| • Make sure that all cables are connected correctly. Check to see if the green |
| Link Status LEDs illuminate on the front of both the sender and speaker |
| units. If the green Link Status LEDs are lit solidly, the communication is |
| working correctly and the audio cables from audio source to the sender |
| should be checked. If the green Link Status LEDs are flashing or off, refer to |
| the “No communication between sender and speaker” section below. |
|
|