– 2 –
Series 1 2300 Series 1 2600x Series 1 4600x
Signal-to-Noise Ratio Over 105 dB A weighted
Bandwidth 10 Hz to 100 kHz ± 3dB
Damping Factor @ 4ΩAt output connector - Over 200
Frequency Response 20 Hz to 20 kHz ± 0.5dB
IM Distortion (IHF) Less than 0.05%
Input Impedance 20k ohms
Input Sensitivity (250 mV - 1 Volt)
Protection Internal analog-computer output protection circuitry limits power in case of
overload. Thermal switch shuts down the amplifier in case of overheating.
Crossover Card N/A 12 dB/octave with selectable
High-Pass, Low-Pass and Full Range
Battery Fusing Rates 10 Amps 20 Amps 30 Amps
(External to Amplifier)
Fuse Type ATC ATC ATC
Dimensions 7.9” (20.07cm) W 7.9” (20.07 cm) W 7.9” (20.07cm) W
5.1” (12.95cm) L 6.1” (15.49cm) L 9.1” (23.11cm) L
2” (5.08cm) H 2” (5.08 cm) H 2” (5.08 cm) H
Specifications subject to change without notice.