TROUBLESHOOTING

NOTE: If you are having problems after installation follow the Troubleshooting procedures below.

Procedure 1: Check Amplifier for proper connections.

Verify that POWER light is on. If POWER light is on skip to Step 2, if not continue.

1.Check in-line fuse on battery positive cable. Replace if necessary.

2.Verify that Ground connection is connected to clean metal of the vehicle’s chassis. Repair/replace if necessary.

3.Verify there is 10.5 - 15.5 Volts of current present at the positive battery and remote turn-on cable. Verify quality connections for both cables at amplifier, stereo, and battery/fuseholder. Repair/replace if necessary.

Procedure 2: Check Amplifier for audio output.

1.Verify good RCA/high-level input connections at stereo and amplifier. Check entire length of cables for kinks, splices, etc. Test RCA/high-level inputs for AC current with stereo on. Repair/replace if necessary.

2.Disconnect RCA/high-level input from amplifier. Connect RCA/high-level input from test stereo directly to amplifier input.

Procedure 3: Check Amplifier if you experience Turn-on Pop.

1.Disconnect input signal to amplifier and turn amplifier on and off.

2.If the noise is eliminated, connect the REM lead of amplifier to source unit with a delay turn-on module.

OR

1.Use a different 12 Volt source for REM lead of amplifier (i.e. battery direct).

2.If the noise is eliminated, use a relay to isolate the amplifier from noisy turn-on output.

Procedure 4: Check Amplifier if you experience excess Engine Noise.

1. Route all signal carrying wires (RCA, Speaker cables) away from power and ground wires.

OR

2.Bypass any and all electrical components between the stereo and the amplifier(s). Connect stereo directly to input of amplifier. If noise goes away the unit being bypassed is the cause of the noise.

OR

3.Remove existing ground wires for all electrical components. Reground wires to different locations. Verify that grounding location is clean, shiny metal free of paint, rust etc.

OR

4.Add secondary ground cable from negative battery terminal to the chassis metal or engine block of vehicle.

OR

5.Have alternator and battery load tested by your mechanic. Verify good working order of vehicle electrical system including distributor, spark plugs, spark plug wires, voltage regulator etc.

13

Page 13
Image 13
Rockford Fosgate 500S, 700S, 150S, 200S, 400S, 300S manual Troubleshooting, Procedure 1 Check Amplifier for proper connections

400S, 700S, 200S, 300S, 150S specifications

Rockford Fosgate is a renowned brand in the audio industry, particularly known for producing high-performance amplifiers designed for car audio enthusiasts. Among their impressive lineup, the Rockford Fosgate 500S, 150S, 300S, 200S, and 700S stand out for their exceptional sound quality, technological advancements, and robust construction.

The Rockford Fosgate 500S is a powerful amplifier designed to deliver 500 watts RMS in a compact format, catering to those who demand high fidelity in a smaller package. It features a Class D topology, which significantly increases efficiency while maintaining excellent sound clarity. The 500S also incorporates an adjustable crossover and a bass boost feature, allowing users to tailor the audio output to their preferences.

Next, the Rockford Fosgate 150S is a versatile 2-channel amplifier that produces 150 watts RMS. Its compact design makes it an ideal choice for smaller vehicle audio systems or as an addition to an existing setup. Built with high-grade components, the 150S ensures durable performance under pressure and is equipped with a variable low-pass crossover, which enables precise control over the frequency range.

The 300S model delivers 300 watts RMS and is designed for those seeking balance between power and clarity. It features a rugged construction, ensuring longevity, while the smart circuitry protects against overheating, short circuits, and other potential issues. Its custom-tuned enclosure further enhances audio fidelity, providing a seamless listening experience.

The Rockford Fosgate 200S is yet another impressive amplifier, offering 200 watts RMS. It combines excellent power output with a user-friendly interface. The amplifier includes a variable high-pass and low-pass crossover, enabling combinations for various speaker configurations, while its compact size allows easy installation in tight spaces.

Lastly, the 700S amplifier reigns supreme with its 700 watts RMS output, making it a powerhouse for audiophiles seeking the ultimate sound experience. Its advanced thermal management system ensures optimal performance even during extended playback. The 700S supports multiple input formats and is compatible with a range of speakers, solidifying its versatility.

Each of these Rockford Fosgate amplifiers is designed with durability, efficiency, and sound quality in mind. Their advanced technologies and user-friendly features make them ideal for any audio enthusiast looking to elevate their vehicle's sound system. With Rockford Fosgate, users can expect not only powerful amplification but also clarity and precision, ensuring an immersive auditory experience.