Rockford Fosgate 400S, 700S, 500S, 150S, 200S, 300S manual Design Features

DESIGN FEATURES

Connections -

Models 150S &

200S

Power

Connections -

Models 300S,

400S & 500S

Power

Connections -

Model 700S

Connections - Models 300S, 400S, 500S & 700S

1 6 8 5 7 9 2 3 4

10 10

1 2 3 4

1 2 3 4

5 6 7 8 7 9 6

10 10

1.LED Power Indicator – The LED illuminates when the unit is turned on.

2.REM Terminal – This spade terminal is used to remotely turn-on and turn-off the amplifier when +12V DC is applied.

3.Power Terminals – The power and ground connectors on the amplifier are gold-plated and will accommodate up to 8 AWG (10 AWG Model 200S) wire maximizing the input current capability of the amplifier.

4.Cast Aluminum Heatsink – The cast aluminum heatsink of the Punch amplifier dissipates heat generated by the amplifier's circuitry. The inherent advantage of casting provides a 30% improvement of cooling over conventional extrusion heatsink designs.

5.Punch Bass (Models 150S & 200S) – Helps correct for acoustical deficiencies in the listening environment by helping produce full range sound without adding excessive boost.. The Punch Bass control is a narrow band adjustment at 45Hz switchable from 0dB to +6dB to +12dB.

5.Punch Bass (All Other Models) – Helps correct for acoustical deficiencies in the listening environment by helping produce full range sound without adding excessive boost.. The Punch Bass control is a narrow band adjustment at 45Hz variable from 0dB to + 18dB. Connection is made with a cable using RJ-45 and can be installed under the dash for remote control access.

4