DESIGN FEATURES

11.REM Terminal – The heavy duty, nickel-plated captive c-clamp wire connector will accept wire sizes from 12 AWG to 24 AWG.This terminal is used to remotely turn-on and turn-off the amplifier when +12V DC is applied.

12.Power Terminals – The power and ground are nickel-plated captive c-clamp wire connectors and will accommodate up to 4 AWG wire.

13.Fuses – These ATC fuses are easily accessible in case of failure.Always replace fuses with same type and rating. See Specifications for fuse ratings. NOTE: Model P450.2 has an additional fuse (not shown) located on the top panel above the fuse on the front panel.

 

INSTALLATION

INSTALLATION CONSIDERATIONS

 

The following is a list of tools needed for installation:

 

Volt/Ohm Meter

Hand held drill w/assorted bits

Wire strippers

1/8" diameter heatshrink tubing

Wire crimpers

Assorted connectors

Wire cutters

Adequate Length—Red Power Wire

#2 Phillips screwdriver

Adequate Length—Remote Turn-on Wire

Battery post wrench

Adequate Length—Black Grounding Wire

This section focuses on some of the vehicle considerations for installing your new amplifier. Pre-planning your system layout and best wiring routes will save installation time.When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.

CAUTION:If you feel unsure about installing this system yourself, have it installed by a qualified technician.

CAUTION:Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the unit.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your unit in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality connectors for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18" (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

5

Page 4 Page 6
Page 5
Image 5
Rockford Fosgate P550.2, P1200.2, P850.2, P450.2, P650.2, P325.2, P250.2, P200.2 manual Installation Considerations
Page 4 Page 6

P550.2, P450.2, P200.2, P250.2, P850.2 specifications

Rockford Fosgate has established itself as a premier audio brand, known for delivering high-quality sound systems that cater to audiophiles and casual listeners alike. Among its impressive lineup of amplifiers, the P-Series stands out, comprising models such as the P650.2, P325.2, P1200.2, P850.2, and P250.2. These amplifiers not only showcase cutting-edge technology but also deliver exceptional performance that can transform any car audio experience.

Starting with the P650.2, this 2-channel amplifier is designed to provide a powerful punch in a compact form. Rated at 65 watts RMS per channel, it is perfect for driving a set of component speakers. The amplifier features a high-pass crossover, which ensures that only the desired frequencies are delivered to the speakers, enhancing sound clarity and reducing distortion. Its Class-D topology ensures efficient power usage, enabling it to produce high output with minimal heat generation.

The P325.2 is another compact 2-channel option, ideal for those who need reliable power without sacrificing space. With a rating of 75 watts RMS per channel, it caters well to entry-level setups while maintaining Rockford Fosgate’s signature sound quality. The adjustable gain control and variable crossover settings allow for customized tuning, making it versatile for various types of audio systems.

For users seeking substantial power, the P1200.2 is a 2-channel amplifier that is hard to overlook. With a robust output of 600 watts RMS per channel at 2 ohms, it offers ample power to drive larger speakers or even multiple pairs. Its advanced thermal management ensures the unit operates efficiently, preventing overheating during extended use. Additionally, the amplifier features full-range capability, making it suitable for both high and low-frequency applications.

The P850.2, another formidable 2-channel model, delivers 425 watts RMS at 2 ohms, providing a good balance between power and performance. This amplifier includes advanced circuitry that enhances both auditory dynamics and overall efficiency. It is built to accommodate various audio setups, making it a versatile choice for system upgrades.

Lastly, the P250.2 serves as an excellent entry-level option, with 25 watts RMS per channel at 4 ohms. It is designed for users looking to improve factory stereo sound without extensive modifications. This amplifier incorporates low-level inputs and an easy-to-use setup, making it ideal for novices venturing into the world of aftermarket audio systems.

Each of these amplifiers features Rockford Fosgate's signature build quality, with durable construction designed to withstand the rigors of automotive environments. With feature sets that include adjustable settings, optimized sound performance, and rugged design, the P-Series amplifiers from Rockford Fosgate deliver a comprehensive audio solution for every listener's needs.
Top Page Image Contents