SPECIFICATIONS
| PUNCH | 8" | 10" | 12" | 15" |
|
|
| P1S48 / P1S88 | P1S410 / P1S810 | P1S412 / P1S812 | P1S415 / P1S815 |
|
|
|
|
|
|
|
|
| Nominal Impedance (ohms) | 4 / 8 | 4 / 8 | 4 / 8 | 4 / 8 |
|
|
|
|
|
|
|
|
| Frequency Response (Hz) |
| ||||
|
|
|
|
|
|
|
| Voice Coil Diameter - inch | 1.50 | 1.50 | 1.50 | 1.50 |
|
| (cm) | (3.81) | (3.81) | (3.81) | (3.81) |
|
|
|
|
|
|
|
|
| Displacement - cu. ft. | 0.024 | 0.043 | 0.048 | 0.060 |
|
| (Liter) | (0.69) | (1.22) | (1.36) | (1.70) |
|
|
|
|
|
|
|
|
| Fs - Free Air Resonance (Hz) | 40 | 30 | 26 | 24 |
|
|
|
|
|
|
|
|
| Qts | 0.52 / 0.54 | 0.52 / 0.55 | 0.53 / 0.57 | 0.62 / 0.66 |
|
|
|
|
|
|
|
|
| Vas - cu. ft. | 0.48 | 1.57 | 3.88 | 6.07 |
|
| (Liter) | (13.5) | (44.4) | (110.0) | (172.0) |
|
|
|
|
|
|
|
|
| Xmax - inch | 0.275 | 0.295 | 0.295 | 0.315 |
|
| (cm) | (0.70) | (0.75) | (0.75) | (0.80) |
|
|
|
|
|
|
|
|
| SPL (dB @ 1w/1m) | 84 | 85 | 86 | 87 |
|
|
|
|
|
|
|
|
| Power | 150 | 150 | 150 | 200 |
|
| (Peak) | 300 | 300 | 300 | 400 |
|
|
|
|
|
|
|
|
Specifications subject to change without notice
WIRING CONFIGURATIONS
By varying the wiring configuration of your speakers you can create an impedance load to match your system. Altering the wiring configurations gives a range of options for impedance loads. Series, Parallel, or
SUBWOOFER CROSSOVERS
There are two operational types of crossovers, passive and active. Passive crossovers (coils or inductors) are placed on the speaker leads between the amplifier and speaker. An active crossover is an electronic filter that separates the audio signal fed to different amplifiers. For optimum subwoofer performance, we recommend using an active
Parallel Wiring
(2) 4 ohm SVC Speaker = 2 ohm Load
Series/Parallel Wiring
(4) 4 ohm SVC Speaker = 4 ohm Load
5
