INSTALLATION

This section focuses on some of the vehicle considerations for installing your new Source Unit. Pre-planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.

CAUTION:If you feel unsure about installing this system yourself, have it installed by a qualified technician.

CAUTION:Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the Unit.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your Source Unit in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality connectors for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

MOUNTING LOCATIONS

The mounting position of your source unit will have a great effect on the performance of your in-dash CD Player.The source unit can be installed in a wide range of operating locations. However, care should be taken to ensure optimum performance.

Engine Compartment

Never mount this unit in the engine compartment. Mounting the unit in the engine compartment will void your warranty.

Instrument Panel

Mounting the source unit in the instrument panel provides optimum access.The source unit should be securely mounted using the “Standard Mount” or “ISO-DIN Mount” method to ensure optimum CD Player performance.

Center Console

Mounting the source unit in the center console provides optimum access. Be sure the installation does not interfere with the operation of the gear shift or parking brake.The source unit should have a mounting angle within ±20° from horizontal.

5

Page 4 Page 6
Page 5
Image 5
Rockford Fosgate RFX9020M manual Installation, Mounting Locations, Engine Compartment, Instrument Panel, Center Console
Page 4 Page 6

RFX9020M specifications

The Rockford Fosgate RFX9020M is a high-performance marine-grade multimedia receiver designed specifically for boat enthusiasts who want to enjoy their music while out on the water. This innovative unit stands out due to its blend of advanced technologies, user-friendly features, and durable construction.

One of the main features of the RFX9020M is its large, high-resolution touchscreen display. Measuring 9 inches diagonally, the display offers bright, vivid colors and excellent visibility even under direct sunlight, which is crucial when navigating bright, reflective surfaces. The touchscreen interface is intuitive, making it easy for users to navigate through their music libraries, radio stations, and settings.

The RFX9020M is equipped with Bluetooth technology, allowing for seamless wireless streaming of music from smartphones and other devices. This feature supports both audio streaming and hands-free calling, ensuring that users can maintain connectivity without fumbling with their devices. Additionally, the receiver is compatible with Apple CarPlay and Android Auto, offering users the ability to access their favorite apps directly from the receiver's display.

Another prominent aspect of the RFX9020M is its robust audio capabilities. The receiver boasts a built-in amplifier with an impressive power output, enhancing audio quality and ensuring that even on noisy waters, the music remains clear and loud. The unit also includes a customizable equalizer, allowing users to tweak the sound to their liking, optimizing the listening experience based on personal preferences and the unique acoustics of their boat.

Durability is crucial for marine applications, and the RFX9020M does not disappoint. It features a weather-resistant design with an IPX6 rating, providing protection against water exposure, making it ideal for marine environments. The rugged build ensures longevity, even under harsh conditions encountered on the water.

Other notable features include multi-zone audio control, allowing users to manage multiple speakers throughout their boat easily, and a wide array of connectivity options, including USB ports, AUX input, and compatibility with various audio formats. Whether you're enjoying a relaxing day on the water or hosting a lively gathering, the Rockford Fosgate RFX9020M delivers impressive performance, versatility, and resilience, making it a top choice for marine audio systems.
Top Page Image Contents