C A U T I O N S

C a s p i a n Preamplifier

 

 

 

AC MAINS SUPPLY

Your Caspian preamplifier is set to operate from a fixed supply voltage which is marked on a label next to the mains input plug. Before connecting the mains lead please check that your mains supply corresponds to this label as below:

230V Products

………………………………….Voltage Range: 220V

– 240V

115V Products

………………………………….Voltage Range:

100V

– 120V

100V Products

………………………………….Voltage Range:

90V

– 110V

The mains lead supplied with this product has an IEC mains socket which plugs into the IEC connector on the unit’s rear panel. The other end is normally attached to the appropriate mains plug for your country. In the UK this is the standard UK13A plug.

This plug should ordinarily not be removed from the lead. If you do remove it, please dispose of it safely so that it cannot be plugged into a mains socket whilst in a potentially dangerous condition. We suggest that you obtain from your dealer a complete replacement lead.

Should you move to another area where either the mains voltage or the mains plugs are different from those as supplied with your preamplifier, please contact the appointed ROKSAN distributor for assistance.

Please observe correct mains polarity at all times.

The preamplifier mains fuses are located on the rear panel next to the IEC mains connector. These must only be replaced by the fuse type and rating as described on the fuse rating label on the rear panel of the unit.

If the equipment is likely to be unused for some time, unplug it from the mains supply.

GENERAL CAUTIONS

FCC WARNING

This equipment may generate or use Radio Frequency energy. The user may lose the right to operate this equipment if unauthorised modifications are made.

INTERFERENCE

Properly installed, this unit should not cause harmful interference to radio communications, There is, however, no guarantee that such interference will not occur in a specific installation. If interference arises (which you can determine by switching the unit off and on) you could try to remedy this problem by the following:

Re-orient or re-locate the receiving antenna

Increase the distance between the preamplifier and receiver

Connect the unit to a different mains circuit from that of the receiver

Consult your ROKSAN appointed dealer or an experienced Radio/TV technician for help and advice

LOCATION

Your Caspian preamplifier should be located in a well ventilated area and kept away from sources of heat, dust, humidity and direct sunlight.

The preamplifier may be positioned either as a free standing unit or alongside another audio/video product. Never place the preamplifier on carpet or any surface likely to hinder normal ventilation.

Never allow liquids or other objects to fall into the unit.

This unit contains no user serviceable parts. Do Not remove any panels or attempt to service it yourself.

Unauthorised servicing will void the warranty.

Roksan Audio ltd

Caspian Preamplifier User Manual

CLASSIFICATION: General Use

Version 2.03

All specifications are liable to change without notice. E&OE

Page 3

ENGLISH

Page 3
Image 3
Roksan Audio M series --1 user manual U T I O N S, AC Mains Supply, General Cautions

M series --1 specifications

Roksan Audio, a renowned British manufacturer known for its high-fidelity audio equipment, has made waves in the audio community with the introduction of the M Series –1. This remarkable piece of equipment encapsulates the brand's dedication to delivering an unparalleled listening experience through innovative technology and exceptional craftsmanship.

The Roksan M Series –1 is characterized by its sleek, modern design that seamlessly fits into any contemporary audio setup. This model adopts an elegant yet robust chassis, constructed from high-quality materials that not only enhance its aesthetic appeal but also minimize resonance and vibration interference. This attention to detail ensures that music lovers can enjoy their favorite tracks without unwanted coloration or distortion.

One of the standout features of the M Series –1 is its advanced digital processing capabilities. It utilizes top-tier digital-to-analog converters, which allow for precise sound reproduction across a wide range of frequencies. This feature is particularly beneficial when playing high-resolution audio files, as it preserves the subtleties and nuances of the original recordings.

Moreover, the M Series –1 incorporates Roksan’s proprietary technology in its amplifier section, which ensures high efficiency and low distortion. The amplifier is designed to deliver robust power, capable of driving a variety of speakers while maintaining sonic clarity. This results in rich bass, vibrant mids, and crisp treble, creating a balanced sound signature that caters to different music genres.

The connectivity options on the M Series –1 are also noteworthy. It is equipped with a versatile array of inputs and outputs, including both analog and digital connections. This allows users to connect various audio sources such as turntables, CD players, and streaming devices, making it a versatile addition to any audio setup.

In addition to these features, the M Series –1 is user-friendly, with a straightforward interface that facilitates easy operation. The inclusion of a remote control adds to the convenience, allowing listeners to adjust settings from across the room.

Overall, the Roksan Audio M Series –1 stands out as a high-performance audio component that combines cutting-edge technology with timeless design. It caters to both audiophiles and casual listeners alike, making it an excellent choice for anyone seeking to elevate their audio experience. With its blend of precision engineering and thoughtful features, the M Series –1 continues Roksan’s legacy of excellence in audio design.