11
Getting Started Step 1: Get Hardware You Need
To start using the BrightSign, you’ll need the following hardware.
• Display – Any monitor, TV, or Elo touch screen with a VGA, Component,
Composite (HD600 only), or HDMI (HD2000 only) inputs.
• CF Card Reader/Writer
o A Compact Flash card to store the demo or your content. Read “Selecting
Compact Flash Cards”
o A USB card reader for your PC or Macintosh that supports compact flash
cards. You can get one for less then $20.
• SD Card Reader / Writer
o Note – SD cards are supported on the HD2000 only. An SD card can be
used on the HD2000 in any situation where this document describes CF
card usage.
• Optional Accessories
o USB keyboard
o USB mouse - You need a USB mouse to use the BrightSign demo if you
don’t have a GPIO button board or an ELO touch screen.
o Null Modem cable – You can use this cable to access the BrightSign shell,
and to troubleshoot scripts by connecting the BrightSign to your
computer’s serial port. This is not required to use the BrightSign.
o SoundBridge Remote
Step 2: Get Latest Software & Autoplay Script
To get the most out of your BrightSign, keep it updated. You can get more information in
the “Software versions” section. Please visit www.rokulabs.com/BrightSign, and
download the latest updates by clicking on the links in the “Downloads” section:
NOTE: For step by step directions updating your BrightSign software, read the “Device
Software and Upgrading” section.
Step 3: Get the Results You Want
Now you’re ready to start using the BrightSign. Just add your content and follow the step
by step directions in the “Playing Media with BrightSign” section.