28
Selecting and Playing Sounds

The Solo section of the Upper keyboard is monophonic, that is, the Solo voice

will only sound for the highest note played on the Upper keyboard.

fig.02-11
1.

Press the Solo [Sax] button (indicator lights).

The name of the selected voice appears in the display for a few seconds.

fig.02-12

Play the Upper keyboard. The selected voice will sound by the highest note

played.

Selecting Solo Voice NOTE
If you press the Solo [To Lower]
button (indicator lights (p. 84),
the Solo voice can now be
played by the Lower keyboard,
not by the Upper Keyboard.
It is possible to change how a
Solo voice will sound.
Normally, the Solo voice will
be sounded by the highest note
y
ou play on the Upper
keyboard, but you can make
settings so that the last-played
note will sound the Solo voice.
You can also make settings so
that the Solo voice will be
sounded by all notes of the
keyboard to which the Solo
voice is assigned. For details
refer to “Changing How the
Solo Voice Responds (Solo
Mode)” (p. 85).
AT-100-300_e.book 28ページ 2008年5月7日 水曜日 午後3時33分