Roland AT-100, AT-300 Changing a Tempo of Rhythm and Automatic Accompaniment, Playing a Countdown Sound When the Intro Ends,

45
Using the Rhythm Performance
Using the Rhythm Performance
You can change the tempo of the Rhythm or Automatic Accompaniment.
fig.03-06(P.40)
1.
Press the Tempo [ ] and [ ] buttons to change the
tempo (speed) of the Rhythm or Automatic Accompaniment.
The value of the tempo currently set (20–500 beats per minute) can be
checked in the display.
You can also check the tempo by viewing the Beat indicator.
If an intro is played before your performance, you can have a countdown
played to the end of the intro, allowing you to understand easily where you
are to start playing.
1.
Press the [Utility] button.
2.
Using the Menu [ ] and [ ] buttons, select
“Intro Count Down.”
3.
Press the Value [-] and [+] buttons to switch the Intro Count
Down “ON” or “OFF.”
4.
Press the [Intro/Ending] button.
5.
Press the [Start/Stop] button.
The intro plays, and a countdown plays to the end of the intro.
When the Synchro Start is on, specifying the chord on the Lower keyboard
starts the intro, and again, a countdown is given.
To return to the basic screen, press the [Utility] button.
Changing a Tempo of Rhythm and Automatic Accompaniment
Tempo [ ] button
The tempo becomes slower
Tempo [ ] button
The tempo becomes faster
Playing a Countdown Sound When the Intro Ends
If you switch rhythms when
“Auto Std Tempo” (p. 108) is
on, the tempo changes to
match the rhythm. If you switch
rhythms when “Auto Std
Tempo” is off, the tempo
remains unchanged even when
y
ou switch the rhythm.
By pressing the Tempo [ ]
and [ ] buttons
simultaneously, the tempo is
returned to the standard (preset)
tempo for the selected Rhythm.
You can adjust the volume of
the Countdown Sound, refer to
“Adjusting the Metronome
Volume (Metronome Volume)”
(p. 111).
You can change the countdown
sound (p. 108).
AT-100-300_e.book 45ページ ２００８年５月７日 水曜日 午後３時３３分