Before You Start Playing

Turning the Power On and Off

* Once the connections have been completed, turn power to

your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

Using Headphones

The AT-5 features a Phones jack. This allows you to play without having to worry about bothering others around you, even at night.

■Tuning On the Power

1.Make sure of the following before the power is

turned on.

•Is the AC adaptor correctly connected to the

inlet?

•Is the power cord correctly connected to the

outlet?

•Is the [Master Volume] knob (located at the

of the

keyboard) set to the Min (minimum) position?

 

2. Press the [Power On] switch to turn

the

power.

 

The power will turn on, and the Basic Screen appears on the display.

Lower position

 

ON

 

* This unit is equipped with a protection circuit. A

interval

(a few seconds) after power up is required before the unit will operate normally.

1.Connect the headphones to the Phones jack on the bottom left of the unit.

The sound from the built-in speakers stops.

Now, sound is heard only through the headphones.

3.Turn the [Master Volume] knob or depress the expression pedal to adjust the volume to a suitable level.

Turning the [Master Volume] knob towards “Max”

increases the volume; turning the knob towards “Min”

decreases the volume. Likewise, pressing on the expression pedal increases the volume, while easing up on the pedal decreases the volume.

decrease

Masterthe volume

Volume

increase

Min

Max

the volume

 

 

■Turning Off the Power

1.

Before switching the power off, set

[Master

 

Volume] knob to the Min (minimum) position.

2.

Press the [Power On] switch to turn

the

 

power.

 

Upper position

OFF

2.Adjust the headphones volume with the [Master Volume] knob and Expression pedal.

* Accepts connection of Stereo headphones.

Some Notes on Using Headphones

•To prevent damage to the cord, handle the headphones only by the headset or the plug.

•Headphones may be damaged if the volume is too high when they are plugged in. Lower the volume on the AT-5 before plugging in headphones.

•To prevent possible auditory damage, loss of hearing, or damage to the headphones, the headphones should not be used at an excessively high volume. Use the headphones at a moderate volume level.

15

LCD

ContraPhonest