Before You Start Playing

Restoring All the Factory Default Settings

The settings stored in the AT-5 can be returned to their

factory settings. This function is called “Factory Reset.”

1.Make sure there is no floppy disk in the disk drive before carrying out the procedure.

2.Turning off the power.

3.While holding down the [One Touch Program] button, press the [Power On] switch to turn the power on.

Do not turn off the power while the following screen is displayed.

When factory reset is completed, the basic screen reappears.

Adjusting the Contrast of the Screen

You can adjust the contrast of the screen.

1.Turn the [LCD Contrast] knob located at the bottom of the unit to adjust the contrast of the screen.

Phones LCD

Contrast

16

Displaying Basic Screens

The instrument’s display provides a large variety of information. The AT-5 has two types of basic display screen: the Rhythm display, and the Composer display. You can alternate from one to the other by pressing the [Display/Exit] button.

■Rhythm Screen

Rhythm

Tempo Chord

■Composer Screen

When internal music data is selected:

Song Name

Measure Number

Tempo Chord

When you have selected a performance song on a floppy disk:

Song Name

Song No.

Tempo Chord