rAX-Synth Owner’s Manual

3. Making connections

Note: To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

Note: When audio cables with resistors are used, the AX-Synth’s volume level may be low. If this happens, use con- nection cables that do not contain resistors.

Connecting the AC adaptor

The AX-Synth can be powered either by 8 AA-type Ni-MH batteries or the supplied AC adaptor.

(1)Make sure that the [POWER] switch is in the “OFF” position.

(2)Turn the [VOLUME] knob to the lowest setting to minimize the volume.

Note: Be sure to use only the supplied AC adaptor. Using any other type may cause malfunction or electric shock. Note: If the AX-Synth is to remain unused for an extended period of time, unplug the adaptor.

(3)Connect the included power cord to the AC adap- tor.

The indicator will light when you plug the AC adaptor into an AC outlet.

AC adaptor

 

 

Power cord

 

 

 

 

 

 

 

 

 

 

 

 

Indicator

to an AC outlet

Place the AC adaptor so the side with the indicator (see illustration) faces upwards and the side with tex- tual information faces downwards.

Note: Depending on your region, the included power cord may differ from the one shown above.

(4)Connect the AC adaptor to the DC IN jack on the AX-Synth’s rear panel, and then plug the AC adap- tor into an electrical outlet.

To prevent inadvertent disruption of power to your unit (should the plug be pulled out accidentally), and to avoid applying undue stress to the AC adaptor jack, anchor the power cord using the cord hook, as shown in the illustration.

AX-Synth rear panel

Cord hook

Inserting or replacing batteries

Eight AA batteries are required to run the AX-Synth on battery power. We recommend the use of rechargeable AA-type Ni-MH batteries. With these batteries you can expect about 6 hours of continuous operation, although this depends on how the AX-Synth is being used.

Note: If you plan to use batteries, please disconnect the AC adaptor from the AX-Synth.

Note: If batteries are installed, disconnecting or reconnecting the AC adaptor’s power cord or the adaptor plug from the AX-Synth’s DC IN socket while the power is on will cause the AX-Synth to turn off. You must turn off the power before con- necting or disconnecting the power cord or AC adaptor.

Note: Avoid using new batteries together with old ones. In addition, avoid mixing different types of batteries (e.g. regular carbon and alkaline batteries).

Note: When replacing batteries, be sure to insert them cor- rectly (ensure correct polarity).

Note: Remove the batteries whenever the AX-Synth is to remain unused for an extended period of time.

(1)Switch off the AX-Synth.

(2)Remove the battery cover located on the bottom of the instrument.

(b)Lift up.

(a) Press the tabs forward.

Note: When turning the AX-Synth upside-down, get a bunch of newspapers or magazines, and place them under the four corners or at both ends to prevent damage to the buttons and controls. Also, you should try to orient the unit so no buttons or controls get damaged.

Note: When turning the AX-Synth upside-down, handle with care to avoid dropping it, or allowing it to fall or tip over.

13

Page 12 Page 14
Page 13
Image 13
Roland AX-Synth owner manual Making connections, Connecting the AC adaptor, Inserting or replacing batteries
Page 12 Page 14

AX-Synth specifications

The Roland AX-Synth is a groundbreaking keytar that merges the classic charm of traditional synthesizers with cutting-edge technology, making it an ideal instrument for modern musicians and performers. Best known for its sleek, ergonomic design and wide-ranging sound capabilities, the AX-Synth caters particularly to keyboardists who want to take their performance to new heights.

One of the standout features of the AX-Synth is its portability. Weighing in at just under 4 kg, the AX-Synth is lightweight and easy to handle, allowing performers to move freely on stage while delivering captivating performances. The AX-Synth’s built-in strap system ensures that the instrument stays securely in place during active performances, allowing musicians to focus on their creative expressions without worrying about stability.

The synthesizer boasts a rich sound engine derived from Roland’s renowned SuperNATURAL technology. This advanced sound engine offers a remarkable level of expressiveness, with a wide range of sounds—from traditional analog synths to complex acoustic instruments. Additionally, the AX-Synth enables real-time sound manipulation thanks to its intuitive controls, including sliders and knobs for adjusting parameters such as filter, modulation, and effects.

One of the most appealing characteristics of the AX-Synth is its deep connectivity. It features MIDI I/O, allowing it to communicate with other devices and DAWs seamlessly. Moreover, it can operate as a USB MIDI controller, opening the door to a vast array of digital audio workstations and software instruments.

Another noteworthy aspect of the AX-Synth is its onboard effects. Musicians can easily add depth and texture to their performances with effects such as reverb, chorus, and delay. This versatility provides users with endless creative possibilities, allowing them to craft unique soundscapes on the fly.

The AX-Synth also includes a variety of performance features like arpeggiators and customizable patches, allowing musicians to explore diverse musical ideas during live shows. Its user-friendly interface makes it easy to navigate through the numerous presets and settings, ensuring that artists spend less time setting up and more time performing.

Overall, the Roland AX-Synth is not just a keytar; it's a powerful tool for musical expression, blending modern technology with the expressive nature of synthesizers. Whether on stage or in the studio, the AX-Synth opens new avenues for musicians, making it an essential instrument for those looking to make their mark in contemporary music.
Top Page Image Contents