Roland C-200 Turning the power on/off

17

Getting Ready to Play

Once the connections have been completed (see p. 16), turn on the power to your various devices in the order specified. By

turning on the devices in the wrong order, you risk malfunctions and/or damage to the speakers and other devices.

■

Turning the power on

1.

Turn the [VOLUME] knob all the way to the left to minimize the volume.

Before switching the power on/off, always make sure to have the volume level turned down. Even with the volume all the

way down, you may still hear some sound when the power is switched on/off, but this is normal. This does not indicate a

malfunction.

2.

Press the [Power] switch.

This unit is equipped with a protection

circuit. A brief interval (a few seconds) after

power up is required before the unit will

operate normally.

3.

Select a tilt tab or piston.

See “Choosing a sound” on p. 21.

4.

Use the [Volume] knob to set the desired

listening level.

If an optional expression pedal is connected

to the EXP socket, press it all the way down

(maximum volume).

5.

Start playing.

■

Turning the power off

1. Turn the [VOLUME] knob all the way to the left to minimize the volume.

2. Press the [Power] switch.

■Energy saving function

Turning the power on/off

NOTE

This unit has an Auto Power Off function,

which automatically switches off the power

after a certain amount of time has passed

without any buttons being operated.

You can disable the Auto Power Off function.

For more about the Auto Power Off function,

refer to “Auto Power Off function” on p. 44.

C-200_e.book Page 17 Monday, April 4, 2011 5:22 PM

Contents

Main Page C-200 Page IMPORTANT NOTES Using USB Memory Additional Precautions Maintenance Storage devices that can be connected to the C-200s USB port Contents Additional Convenient Functionality <Advanced Operation>.......................... 27 Page Page Introduction Main features Conventions used in this manual About this owners manual Panel Descriptions [11] [10] [13][12] [14] Front Panel [19] [15] [16] [17] [18] Panel Descriptions Rear panel [1] [2] [3] [4] [5] [6] [7] [8] Getting Ready to Play Placing on the KS-12 stand Placing the C-200 on a stand Connect the AC adaptor Turning the power on/off Getting Ready to Play 1. 2. 3. Listening to all demo songs 1. Using optional headphones Listening to the demo songs 3. Stopping or pausing playback 4. 5. 6. 7. Playing <Basic Operation> Adjusting the volume Adjusting the reverb Adjusting the volume balance of the PEDAL/MANUAL I and MANUAL II divisions Adjusting the timbre (brightness) Choosing a sound Playing the MANUAL I division 1. 2. Adding the MANUAL II division Playing the MANUAL I and II divisions with separate hands Playing <Basic Operation> 1. 2. Using the Tremulant to add expression Playing the PEDAL division 1. 2. 1. Playing a harpsichord sound Playing the Fortepiano sound Playing the Piano sound Playing the Celesta sound Selecting a classical tuning (Pitch) Selecting a temperament Equal Werckmeister Kirnberger Vallotti Meantone Additional Convenient Functionality <Advanced Operation> 1. Matching the pitch of another instrument (Tuning) 2. 3. Changing the split points 4. 3. Additional functions for the Classic Organ sounds Using the organ registration memories Saving your organ registration memories Switching all tilt tabs off (CANCEL) Saving your registration set to an optional USB memory Choosing different organ voices and setting their volume (Voice Palette) Selecting a sound variation (Voice Palette) 1. 2. 3. Saving your settings to the Global area Layering harpsichord sounds 1. 2. 3. Using the C-200s internal recorder Recording 1. 2. 1. Playing back your recorded song Saving your song to an optional USB memory 1. 2. 3. Playing back songs on an optional USB memory Loading the factory settings Playing through external amplifiers/Recording your performance using an audio device Using an optional sustain pedal Using an optional expression pedal Connecting a pedal keyboard Connecting a MIDI sequencer to the C-200 Connecting the C-200 to MIDI equipment What is MIDI? Local On/Off setting Turning Visual Control on/off 1. 2. 3. Selecting clips on an optional MIDI Visual Control/V-LINK-compatible device Using the Visual Control function 1. 2. 3. 1. Auto Power Off function Expression pedal assign function Division sound list PEDAL division MANUAL I division Division sound list MANUAL II division Other Sounds MIDI Implementation Chart [Classic Keyboard] Date: March 2011 Model: C-200 Version: 1.00 Specifications C-200: Classic Keyboard Specifications Weight Accessories Options