Roland C-200 Local On/Off setting

42

Additional Convenient Functionality <Advanced Operation>

If you’ve connected the C-200 to a MIDI sequencer, you should set the C-200 to the Local Off state.

Most sequencers enable their Thru function, so that the notes that you play on the keyboard or that are played back by the

recorder will reach the sound generator section by both routes (1) and (2) if the C-200 is in the Local On state, causing notes to be

sounded in duplicate, or to be cut off unnaturally.

To prevent this, choose the “Local Off” setting so that route (1) is disconnected.

◆While holding down the [Function] piston, press the

Harpsichord [4’] piston to switch off the Local function.

Repeat this operation to select Local On again.

*If you’ve selected Local Off and no sequencer is connected, you

won’t hear any sound when you play the C-200’s keyboard.

The Local On setting is selected when you turn on the

power.

Local On/Off setting

MIDI

IN

MIDI

IN

MIDI

OUT

MIDI

OUT

Sequencer

Memory

Sound

Generator

Each note played is

sounded twice

(2) Soft Thru On

(1) Local On

Local On

Sound is emitted

Sound Generator

Local Off

No sound produced

Sound Generator

Local On Local Off

C-200_e.book Page 42 Monday, April 4, 2011 5:22 PM

Contents

Main Page C-200 Page IMPORTANT NOTES Using USB Memory Additional Precautions Maintenance Storage devices that can be connected to the C-200s USB port Contents Additional Convenient Functionality <Advanced Operation>.......................... 27 Page Page Introduction Main features Conventions used in this manual About this owners manual Panel Descriptions [11] [10] [13][12] [14] Front Panel [19] [15] [16] [17] [18] Panel Descriptions Rear panel [1] [2] [3] [4] [5] [6] [7] [8] Getting Ready to Play Placing on the KS-12 stand Placing the C-200 on a stand Connect the AC adaptor Turning the power on/off Getting Ready to Play 1. 2. 3. Listening to all demo songs 1. Using optional headphones Listening to the demo songs 3. Stopping or pausing playback 4. 5. 6. 7. Playing <Basic Operation> Adjusting the volume Adjusting the reverb Adjusting the volume balance of the PEDAL/MANUAL I and MANUAL II divisions Adjusting the timbre (brightness) Choosing a sound Playing the MANUAL I division 1. 2. Adding the MANUAL II division Playing the MANUAL I and II divisions with separate hands Playing <Basic Operation> 1. 2. Using the Tremulant to add expression Playing the PEDAL division 1. 2. 1. Playing a harpsichord sound Playing the Fortepiano sound Playing the Piano sound Playing the Celesta sound Selecting a classical tuning (Pitch) Selecting a temperament Equal Werckmeister Kirnberger Vallotti Meantone Additional Convenient Functionality <Advanced Operation> 1. Matching the pitch of another instrument (Tuning) 2. 3. Changing the split points 4. 3. Additional functions for the Classic Organ sounds Using the organ registration memories Saving your organ registration memories Switching all tilt tabs off (CANCEL) Saving your registration set to an optional USB memory Choosing different organ voices and setting their volume (Voice Palette) Selecting a sound variation (Voice Palette) 1. 2. 3. Saving your settings to the Global area Layering harpsichord sounds 1. 2. 3. Using the C-200s internal recorder Recording 1. 2. 1. Playing back your recorded song Saving your song to an optional USB memory 1. 2. 3. Playing back songs on an optional USB memory Loading the factory settings Playing through external amplifiers/Recording your performance using an audio device Using an optional sustain pedal Using an optional expression pedal Connecting a pedal keyboard Connecting a MIDI sequencer to the C-200 Connecting the C-200 to MIDI equipment What is MIDI? Local On/Off setting Turning Visual Control on/off 1. 2. 3. Selecting clips on an optional MIDI Visual Control/V-LINK-compatible device Using the Visual Control function 1. 2. 3. 1. Auto Power Off function Expression pedal assign function Division sound list PEDAL division MANUAL I division Division sound list MANUAL II division Other Sounds MIDI Implementation Chart [Classic Keyboard] Date: March 2011 Model: C-200 Version: 1.00 Specifications C-200: Classic Keyboard Specifications Weight Accessories Options