Roland CDR-88RW-4 Power Supply, Placement, Maintenance, Handling the CD-RWDrive, Important Notes

IMPORTANT NOTES

In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2 and 3, please read and observe the following:

Power Supply

•Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system).

•Before connecting this unit to other devices, turn off the power to all units. This will help prevent malfunctions and/or damage to speakers or other devices.

Placement

•This device may interfere with radio and television reception. Do not use this device in the vicinity of such receivers.

•Observe the following when using this device. For further details, refer to “Handling the CD-RW Drive” on this page.

•Do not place the unit near devices that produce a strong magnetic field (e.g., loudspeakers).

•Install the unit on a solid, level surface.

•Do not move the unit or subject it to vibration while the drive is operating.

•Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.

•To avoid possible breakdown, do not use the unit in a wet area, such as an area exposed to rain or other moisture.

Maintenance

•For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe the unit thoroughly with a soft, dry cloth.

•Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

Handling the CD-RW Drive

•Install the unit on a solid, level surface in an area free from vibration.

•Avoid using the unit immediately after it has been moved to a location with a level of humidity that is greatly different than its former location. Rapid changes in the environment can cause condensation to form inside the drive, which will adversely affect the operation of the drive and/or damage discs. When the unit has been moved, allow it to become accustomed to the new environment (allow a few hours) before operating it.

•Remove any disk from the drive before powering up or down.

•To avoid the risk of malfunction and/or

damage, insert only discs with into the CD-RW drive. Never insert any other type of disc. Avoid getting paper clips, coins, or any other foreign objects inside the drive.

•When you carry CDR-88RW-4, remove the disc from the loading tray. Do not carry the device with the loading tray downward.

•Avoid vibration and shock during operating. Do not carry with the power on.

•Optical pickup is dust-proof. Using a CD type pickup cleaner may damage.

5