IMPORTANT NOTES

357

•Do not put anything that contains water (e.g., flower vases) on the unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the unit. Swiftly wipe away any liquid that spills on the unit

using a dry, soft cloth.

359

•Do not paste stickers, decals, or the like to this instrument. Peeling such matter off the instrument may damage the exterior finish.

•During Operation, this device must be placed at a distance of no less than 50 cm from any walls.

•Do not allow objects to remain on top of the unit while it is in operation.

•If you cover the heat sink, their function is defeated, and their temperature can rise to overly high levels, which could cause burns if they are accidentally touched.

•Placing heavy objects on this unit may result in injury if it overturns or falls.

•During setup and transport, be careful not to damage the vibrating portions (the speaker cone and diaphragm).

•Be sure to place the monitor so that the heat sink on the rear panel is not obstructed. Also, make sure the monitor does not touch any curtains or other fabrics.

•The heat sink performs cooling when the monitor is placed as shown below. Do not place the monitor on its side or upside down.

fig.06.e

Heated Air

•When this device is in operation, the heat sink located on the rear panel will become hot. Take care not to touch them with your hands.

Maintenance

401a

•For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to

wipe the unit thoroughly with a soft, dry cloth.

402

•Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or deformation.

Additional Precautions

553

•Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks and connectors. Rough handling can lead to

malfunctions.

556

•When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will avoid causing shorts, or damage to the cable’s

internal elements.

557

•A small amount of heat will radiate from the unit during

normal operation.

558b

•To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels (especially when it is late at

night).

559a

•When you need to transport the unit, package it in the box (including padding) that it came in, if possible. Otherwise, you will need to use equivalent packaging

materials.

562

•Use a cable from Roland to make the connection. If using some other make of connection cable, please note the following precautions.

•Some connection cables contain resistors. Do not use cables that incorporate resistors for connecting to this unit. The use of such cables can cause the sound level to be extremely low, or impossible to hear. For infor- mation on cable specifications, contact the manufac- turer of the cable.

5