8
MAKING THE CONNECTIONS
When making connections to other equipment, be sure that all equipment is switched off. If you try to make connections
while the power is turned on, the settings for the FC-200 may be changed.
MIDI IN MIDI OUT
MIDI INMIDI OUT

External MIDI Device External MIDI Device

* If you want to use a foot switch for changing the mode, be sure to connect a BOSS FS-5U foot
switch (Optional) to the MODE jack.
* When hooking up a separately available BOSS FS-5U foot switch, set the polarity switch as
shown below.
Polarity Switch
* Use only the specified expression pedal (EV-5; sold separately). By connecting any other
expression pedals, you risk causing malfunction and/or damage to the unit.
* Sshould the FC-200 tend to rock a little when placed on the floor, turn the two adjusters on the
unit’s bottom until you have it in a stand

Loading Batteries

The FC-200 is not loaded with batteries when purchased. If you want to use batteries instead of an
AC adaptor, then refer to “ABOUT CHANGING THE BATTERIES” (p. 33) and install batteries first.

Connecting an AC Adaptor

If you’re using a BOSS PSA-Series AC adaptor, here’s how to connect the cord and secure it on the
cord hook.