72
Chapter 6 Using the Built-in Effects
LEVEL (Output level) 0–127
Specify the output volume.
36: FL ➔ DLY (Flanger ➔ Delay)
This effect connects a flanger and a delay in series.
fig.6-39

FL PRE DLY (Flanger pre delay time) 0.0–100 ms

Specify the time delay from the original sound until the
flanger sound is heard.

FL RATE (Flanger rate) 0.05–10.0 Hz #

Specify the modulation frequency of the flanger sound.
FL DEPTH (Flanger depth) 0–127
Specify the modulation depth of the flanger sound.
FL FEEDBACK (Flanger feedback level) -98–+98 %
Specify the proportion (%) of the flanger sound that is to be
returned to the input.
Positive (+) settings will return the sound to the input with
the original phase, while negative (-) settings produce an
inverted phase.
You can set a value from -98% to +98%, in steps of 2%. There
is no feedback when the value is zero.

FL BALANCE (Flanger balance) D100:0E–D0:100E

Specify the volume balance between the original sound and
the flanger sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the flanger sound
will be output.
DLY TIME (Delay time) 0.0–500 ms
Specify the time delay from the original sound until the delay
sound is heard.
DLY FEEDBACK (Delay feedback level) -98–+98 %
Specify the proportion (%) of the delay sound that is to be
returned to the input.
Positive (+) settings will return the sound to the input with
the original phase, while negative (-) settings produce an
inverted phase.
You can set a value from -98% to +98%, in steps of 2%. There
is no feedback when the value is zero.
DLY HF DAMP (Delay HF damp)
200/250/315/400/500/630/800/1000/1250/1600/2000/2500/3150/
4000/5000/6300/8000 (200–8000 Hz), Bypass
Specify the frequency at which the high frequency range of
the delayed sound returned to the input will be cut.
If you do not want the sound to be cut, select Bypass.
DLY BALANCE (Delay balance) D100:0E–D0:100E
Specify the volume balance of the flanger sound that passes
through the delay and the flanger sound which does not pass
through the delay.
With a setting of D100:0E only the flanger sound will be
output, and with a setting of D0:100E only the flanger sound
that passes through the delay will be output.
LEVEL (Output level) 0–127
Specify the output volume.
37: CHO ➔ FL (Chorus ➔ Flanger)
This effect connects a chorus and flanger in series.
fig.6-40

CHO PRE DLY (Chorus pre delay time) 0.0–100 ms

Specify the time delay from the original sound until the
chorus sound is heard.

CHO RATE (Chorus rate) 0.05–10.0 Hz

Specify the modulation frequency of the chorus sound.
CHO DEPTH (Chorus depth) 0–127
Specify the modulation depth of the chorus sound.

CHO BALANCE (Chorus balance) D100:0E–D0:100E

Specify the volume balance between the original sound and
the chorus sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the chorus sound
will be output.

FL PRE DLY (Flanger pre delay time) 0.0–100 ms

Specify the time delay from the original sound until the
flanger sound is heard.

FL RATE (Flanger rate) 0.05–10.0 Hz #

Specify the modulation frequency of the flanger sound.
FL DEPTH (Flanger depth) 0–127
Specify the modulation depth of the flanger sound.
Feedback
Delay
L in
R in
L out
R out
Balance E
Balance E
Balance D
Balance D
Flanger
Balance E
Balance E
Balance D
Balance D
Feedback
Feedback
Flanger
L in
R in
L out
R out
Balance E
Balance E
Balance D
Balance D
Chorus
Balance E
Balance E
Balance D
Balance D