16

Before You Play

Plug the speaker cable extending from the stand into
the SPEAKER connector located at the rear of the
HP207’s bottom panel.
Pay attention to the shape of the speaker cable’s
connector, and insert it until you hear it click securely
into place.

fig.SpeakerCable.eps

Plug the pedal cord extending from the stand into
the Pedal connector located at the rear of the
HP207’s bottom panel.

fig.PedalCord.eps

1.

Make sure that the [Power] switch located at
the left side of the front panel is off (in the
upward position).

fig.PowerOff-e.eps

2.

Turn the [Volume] knob all the way toward the
left to minimize the volume.

3.

Connect the included power cord to the AC
INLET located at the rear of the bottom panel.

4.

Plug the other end of the power cord into an
AC outlet.

fig.PowerCord.eps

You must use the power cord included with the
HP207.

Getting Ready to Play

Connecting the Speaker Cable
Connecting the Pedal Cord

Connecting the Power Cord
OFF
Upward
position
3
4
NOTE
HP207_e.book 16ページ ２００６年１２月２５日　月曜日　午前９時５２分