84
Various Settings
Normally, you don’t need to install a driver in order to connect
the HP207 to your computer. However, if some problem
occurs, or if the performance is poor, using the Roland
original driver may solve the problem.
Specify the USB driver you want to use, and then install the
driver.
If you change this setting, turn on the power once again.
For details on downloading and installing the
Roland original driver, refer to the Roland website.
Roland website:
http://www.roland.com/
For details on connecting your computer via the USB
connector, refer to “Connecting a Computer” (p.
91)
This setting is remembered even when the power is
turned off.
In some cases, when USB memory is connected to the external
memory connector, it may take longer for data to be loaded,
or data may fail to be loaded successfully. If this occurs, you
may be able to solve the problem by changing the external
memory setting.
If you change this setting, turn on the power once again.
This setting is remembered even when the power is
turned off.
If you are playing the HP207 through a connected external
system, there may be cases in which the volume from your
external system is too low even when the HP207’s volume is
turned to the maximum setting. In such cases, you can adjust
the master gain setting as follows.
Adjusting the master gain will also affect the volume of the
internal speakers and headphones.
The sound may distort if you increase the volume
excessively.
This specifies how 3D Sound Control (p. 31) will be applied.
Changing the USB Driver Settings (USB Driver) Setting Explanation
Generic
Choose this if you want to use the standard
USB driver that was included with your
computer.
Normally, you should use this mode.
Original
Choose this if you want to use a USB driver
downloaded from the Roland website.
Changing the External Memory Setting (Ext. Memory Mode) Setting
Mode 1, Mode2
Adjusting the Volume (Master Gain) Setting
-12–0–12 dB
Changing How Grand Space is Applied (3D Mode) Setting Explanation
Auto
When the headphones are connected, the
depth effect is optimized for headphones,
and when no headphones are connected,
the optimal depth for speakers is applied.
Speaker
The optimal depth for speakers is used,
regardless of whether or not headphones
are connected.
Grand Space is also applied to the sound
output from the Output connectors, making
this convenient when you want to play
through speakers connected to the Output
connectors.
Headphones
The optimal depth for headphones is used,
regardless of whether or not headphones
are connected.
NOTE
HP207_e.book 84ページ ２００６年１２月２５日 月曜日 午前９時５２分