21

Before You Play

You can use headphones to enjoy the HP207 without
disturbing those around you, such as at night. Since the
HP207 has two headphone jacks, two people can also use
headphones simultaneously.
If you’re using only one set of headphones, you may connect
them to either of the two headphone jacks.

fig.Headphones.eps

1.

Plug the headphones into the PHONES jack
located at the left of the HP207’s bottom
panel.

If headphones are connected, no sound will be output
from the HP207’s speakers.

2.

Use the HP207’s [VOLUME] knob (p. 19) to
adjust the headphone volume.

Cautions when Using Headphones

• To prevent damage to the cord’s internal conductors,
avoid rough handling. When using headphones, mainly
try to handle either the plug or the headset.
• Your headphones may be damaged if the volume of a
device is already turned up when you plug them in.
Minimize the volume before you plug in the headphones.
• Excessive input will not only damage your hearing, but
may also strain the headphones. Please enjoy music at an
appropriate volume.
• Use headphones that have a stereo 1/4” phone plug.
Whenever you are not using the headphones, you can hang
them on the headphone hook of the HP207.

Attaching the Headphone Hook

1.

Press and twist the headphone hook included
with the HP207 into the hole in the bottom left
of the HP207 (refer to the figure above).

2.

Turn the headphone hook wing nut to secure
the headphone hook.

Do not hang anything other than headphones on the
headphone hook. Doing so may damage the
instrument or the hook.
If headphones are connected, a headphone symbol
is shown in the lower left of the screen.

fig.PhonesMark.eps

Listening through Headphones
Headphones

Using the Headphone Hook

Headphone Hook
NOTE
HP207_e.book 21ページ ２００６年１２月２５日　月曜日　午前９時５２分