18
1. Preparing the Machine
Windows 2000
1
Start Windows and log on as "Administrator."
2
Insert the Roland Software Package CD-ROM
into the CD-ROM drive.
The setup menu appears automatically.
3
Switch on the machine.
Wait a short while until the light stops flashing.
The flashing continues for about one minute.
From this point on, keep the machine's door closed
until installation ends. Failure to do so switches off
the power, which may prevent installation from com-
pleting correctly.
4
Connect a USB cable (sold separately).
The [Found New Hardware Wizard] dialog appears.
5
Click [Next].
These lights flash clock-
wise two at a time.
Press the power button.
1-3 Installing and Setting Up the Software
USB connector
USB port
USB cable
Computer
The rear of
the machine