Leveling the material
Press the material down with the Leveler very GENTLY. Great force is NOT necessary.
*Only about 1 kg maximum force is necessary to press down the leveler. Excessive force will have a negative influence on the workpiece and the quality of imprinting.
Press down gently | Excessive force causes |
(700 – 1000 gram | the material to bend, |
force) level. | shift, etc. |
YesNo
Adjusting the base
Turn the knob slowly and gently. No excessive force is necessary.
YesNo
Appropriate force | Excessive force |
Base holds the workpiece level. | Base tilts and cannot hold the workpiece level. |
The Adhesive Sheet
The adhesive sheet collects dust easily. Should the adhesive power become decreased, wash it gently (don’t use a sponge or scrubbing brush) and dry naturally. The sheet will hold the workpiece strongly again. (See the User’s manual Part 4, Maintenance.)
4