For Best Imprinting Results - Part 2

Adjusting the image

To obtain the best imprinting quality, adjust gamma, brightnesss and contrast while looking at the on-screen preview.

The on-screen preview displays an image for reference purposes only. The image in the preview and your actual results may vary. If you are using METAZA for the first time, try the trial material included in the package first.

How to adjust gamma, brightnesss and contrast

1.Open print preview from the File menu of Dr. METAZA. The preview will appear.

2.Use the control bar to adjust the image until you obtain the desired image. *If not familiar with this operation, adjust the amount a little at a time while leaving the material loaded on the work table.

Adjust one unit at a time: Gamma by 0.1 to 0.2, Brightness and Contrast by 1 to 2

Basic adjustments: Adjust gamma

Increase or decrease gamma by 0.1~0.2 units.

Advanced adjustments: Combine adjusting gamma, brightness and contrast.

There are various combinations available depending on the original photo image. The brightness and contrast should be adjusted 1~2 units at a time.

 

After

 

Gamma increased

Before

&

Brightness decreased

Brightness increased

&

Contrast decreased

5