Panasonic KX-HGW600 manual Troubleshooting, Specification and

	Operating Instructions
About Network Camera Setup
Problem	Cause and Remedy
You cannot view the manually	• To set up your Network Camera manually, please
registered Network Camera.	set up the Screen Assignment ( Page 77) window
	and Port Forwarding ( Page 94)/NAT (IP
	unnumbered) ( Page 96) window for the IP
	address of the Network Camera.

•If you restart the manually registered Network Camera, the setting may be changed by the Automatic Setup function. Check Do Not Use on the Setup Page of the KX-HGW600 ([Optional Setup] DHCP) or clear Enable check box on the Network window of Network Camera ([Network] 1. Network Configuration from the Setup Program).

You cannot access the	•	The network traffic may not be smooth. Wait for a
Camera Portal page and		while and try again.
Setup Page from the WAN	•	Make sure the WAN indicator lights green. If it is off,
side.		check the connections on the WAN.
	•	When you use the proxy server setting, setup of
		your web browser may be needed to access the
		Setup Page. For more information, please refer to
		Page 126 and check your setting.
	•	JavaScript is used on the Setup Page. If JavaScript
		is invalid on the setup of the web browser, access
		the Setup Page after enabling JavaScript.
		Click [Tools menu]		[Internet Options]
		[Security tab]	[Custom Level]		check
		[Enable] in “Active Scripting” of JavaScript.
	• If you check Restricted Access on the Setup Page
		of the KX-HGW600 ([Camera Setup]			[Access
		Control] window), check None or Administrator
		Only.
	•	Packet Filtering function may prevent you from
		accessing the Camera Portal page. Enter the
		appropriate settings checking Packet Filtering Log
		information.

Troubleshooting Specification and

[For assistance, please call: 1-800-272-7033] 143