Panasonic KX-HGW600 manual To change or delete entries

Operating Instructions

To change or delete entries

1.Click [Packet Filtering] on the Setup Page.

2.Click the entry number you want to change or delete in the Current Status table.

3.Change the settings and click [Change]. To delete, click [Delete].

• To clear the current settings, click [Clear].

4.

5.

Note

Do not enter the space in each data field.

When you have finished, click [Save]. The settings will be saved.

Click [Restart Now!].

To change the priority

Packet Filtering is processed from the lower entry number to the higher entry number. To change the priority of the entry number, enter the source entry number in the left data filed and the destination entry number in the right data filed. Then click [Move] and [Save]. Click [Restart Now!] on the Setup Page.

<Example>

To prevent the outside network from accessing the communications between Windows NT and Windows 2000 PCs.

Type Direction			IP	Port	IP	Port	Protocol	Log
			Address		Address			Output
Do Not	L	W				135	TCP&UDP	Y
Permit
Do Not	L	W		135			TCP&UDP	Y
Permit
Do Not	W	L				135	TCP&UDP	Y
Permit
Do Not	W	L		135			TCP&UDP	Y
Permit
Do Not	L	W				445	TCP&UDP	Y
Permit
Do Not	L	W		445			TCP&UDP	Y
Permit
Do Not	W	L				445	TCP&UDP	Y
Permit
Do Not	W	L		445			TCP&UDP	Y
Permit

104