Panasonic KX-HGW600 System Features, Instructions for the data fields, Entry, Protocol, Address

	Operating Instructions
	Instructions for the data fields
Entry	Check Enabled or Disabled. When you check Enabled, the
	entry works as specified. When you check Disabled, the
	entry does not work but will work when you check Enabled
	later.
Protocol	Select the protocol(s) to send or receive data to/from the
	WAN side. TCP, UDP, TCP&UDP, ICMP or PPTP are
	available.
Forwarding Port No.	Set the port number(s) to send or receive data to/from the
	WAN side. Do not enter the space.
	• When a single port is desired, set the port number.
	• When a range of port is desired, enter the range using "-".
	For example, to set the port numbers from 2000 to 3000,
	enter as "2000-3000". The starting port number must be
	lower in value than ending port number.
	The port numbers from 60000 to 60016 are only available
	for the KX-HGW600.
Forwarding IP	Enter the private IP address of each device connected to the
Address	KX-HGW600. A data from the Internet is forwarded to the IP
	address entered in this data field. In this case, set the IP
	address of the corresponding Network Camera to this value.
Note
When Auto is displayed in the Current Status table, you cannot change the
settings because the KX-HGW600 has set up Network Camera automatically.		System Features

[For assistance, please call: 1-800-272-7033] 95