Panasonic KX-HGW600 manual Channel

Operating Instructions

3.

4.

When you have finished, click [Save]. The settings will be saved.

Click [Restart Now!].

Notes

•Do not enter the space in the SSID.

•After setting up your Network Camera and PC, enter the same SSID to the wireless devices for security and check Do Not Permit in the Blanked SSID connection.

Instructions for the data fields

SSID

SSID (Service Set IDentifier) is a wireless network name.

For security, the wireless devices require the same SSID in

the wireless communication.

Enter the SSID as follows: (The default setting is "HGW600".)

• The SSID is case-sensitive.

• The SSID can be up to 32 alphanumeric characters.

Blanked SSID

When you check Permit, the wireless devices which are set

connection

to "ANY" or blank in the SSID can communicate. After

completing the SSID setting, check Do Not Permit for

security.

Channel

You can set the number of the channel on which wireless

devices communicate. This channel can be selected from 1

to 11 using the drop-down menu. (The default setting is "1".)

If one or more wireless devices are communicating each

other, the communication speed may be reduced due to the

same bandwidth being used. In this case, change to a

different channel for good communication.

1 Channel

6 Channel

11 Channel

2 Channel

7 Channel

3 Channel

8 Channel

4 Channel

9 Channel

5 Channel

10 Channel

2400MHz

2500MHz

Notes

•Set Encryption or MAC Address Filtering if necessary. To encrypt the data that is transmitted over your wireless network, click [Encryption] on the Wireless Setup window ( Page 86 ).

•If you want to limit the connections from the wireless devices to the KX- HGW600, click [MAC Address Filtering] on the Wireless Setup window. ( Page 91 ).

84