Panasonic KX-HGW600 manual Troubleshooting, Specificationand

				Operating Instructions
		About Setup Page
Problem		Cause and Remedy
The Camera Portal page and	• Make sure the LAN 1—4 indicators and WIRELESS
Setup Page do not appear.		indicator light green. Make sure the indicators on
		the Ethernet card and wireless card is on. If any
		indicator is off, check the Ethernet cable on the
		LAN.
	• The PC on the LAN side may not be assigned an IP
		address by the KX-HGW600. Make sure Obtain an
		IP address automatically is checked on the PC
		and restart.
	•	When you change the IP address(:Port No.) of the
		KX-HGW600 (	Page 106), enter the new IP
		address(:Port No.) in the address field of the web
		browser.
		(When port no. is 80 [default setting], you do not
		need to enter port no.)
	•	When you use the proxy server setting, setup of
		your web browser may be needed to access the
		Setup Page. For more information, please refer to
		Page 126 and check your setting.
	•	JavaScript is used on the Setup Page. If JavaScript
		is invalid on the setup of the web browser, access
		the Setup Page after enabling JavaScript.
		Click [Tools menu]		[Internet Options]
		[Security tab]	[Custom Level]		check
		[Enable] in "Active Scripting" of JavaScript.
The Setup Page does not	•	Ask your network administrator for the user name
appear after entering a		and password.
password.
The wireless devices cannot	•	Make sure a PC in a wireless network is set as
communicate with the		follows:
KX-HGW600.		Wireless mode: Infrastructure
		SSID: HGW600
		Encryption: None
	• The wireless devices or the KX-HGW600 may be
		out of radio waves. Or there may be an obstacle
		such as the wall of concrete. Locate the wireless
		devices near this unit.
	•	Make sure Permit is checked in the Blanked SSID				Troubleshooting	Specificationand
		connection on the Wireless Setup window.

[For assistance, please call: 1-800-272-7033] 141