Panasonic KX-HGW600 manual Notes for NAT IP unnumbered Setup

Operating Instructions

Notes for NAT (IP unnumbered) Setup

•When each IP address on the WAN is different in the IP Address (WAN), each IP address on the LAN cannot overlap in the IP Address (LAN).

Do not enter

the same

IP address.

•Setting "" in the both Protocol and Forwarding Port No. overrides the previous settings. For example, when the data from a specific port number (10, 20, 30) is sent to the IP addresses (192.168.0.1-3) and the other is sent to the IP address (192.168.0.4), the fourth IP addresses (192.168.0.4) is given priority over the IP address (192.168.0.1-3). That is, the previous settings (192.168.0.1-3) do not work.

These settings do not work.

Static NAT function works.

In this case, change the fourth setting as follows so that the other settings work in the order of entry number.

Select TCP.

100