Manuals / Panasonic / Computer Equipment / Network Card

Panasonic KX-HGW600 Connection, Always, Automatic, Manual, Disconnection on, Idle, DNS Relay

Models: KX-HGW600

1 152

Download 152 pages 26.77 Kb

Page 108

Connection

Operating Instructions

Connection
• Always	The PPPoE Connection is online as long as the KX-HGW600 is
	turned on. This is the default setting. This allows you to stop the
	PPPoE Connection manually on the PPPoE Connection window
	( Page 115). To initiate the PPPoE Connection again, restart
	the KX-HGW600.
• Automatic	The PPPoE Connection is online only when data is being sent to
	the Internet from each device on the LAN side. This allows you to
	initiate/stop the PPPoE Connection on the PPPoE Connection
	window. ( Page 115)
• Manual	The PPPoE Connection is online only when you click [Connect]
	on the PPPoE Connection window ( Page 115). To stop the
	PPPoE Connection, click [Disconnect] on the PPPoE
	Connection window.

Disconnection on	If Enabled is checked, the KX-HGW600 detects when the
Idle	PPPoE Connection is idle and will automatically disconnect it
	when the length of idle time exceeds the user-specified limit.
	When you use this function, check Enabled and specify the time
	(1-99 minute). When you check Always, the timer does not work.

Note

When you access the Camera Portal page from the WAN side, PPPoE Connection cannot be disconnected.

DNS Relay

DNS Relay function frees you from setting up the DNS server address in each device on the LAN side, even though it is set up with static IP address. This function distributes the DNS server address to the Network Camera and the PC on the LAN side.

Note

When the DNS server is connected to the LAN side, do not use this function.

Use	The KX-HGW600 communicates with the Network Camera and
	PCs on the LAN side as a substitute for the DNS server.
	(The default setting is "Use".) When static IP address is assigned
	to each device on the LAN side, enter the IP address of the
	KX-HGW600 (192.168.0.254) in the network or TCP/IP
	properties window of each device.

Do Not Use	This function does not work. When static IP address is assigned
	to each device on the LAN side, enter the IP address of the
	specified DNS server in the network.

108

Image 108

Panasonic KX-HGW600 manual Connection, Always, Automatic, Manual, Disconnection on, Idle, DNS Relay, Do Not Use

Contents

Network Camera Management System WIRELESS LAN1POWER Operating InstructionsPlease check the following items when unpacking Before usingIntroduction For Operation AssistanceTrademarks Network Camera Management System MemoAttach your purchase receipt here For your future reference IMPORTANT SAFETY INSTRUCTION SAVE THESE INSTRUCTIONSTable of contents SetupSystem Features Product IntroductionSpecification and Troubleshooting Technical GuidesIndex Section Product IntroductionIntroduction Product1.1.1 Main Features Automatic Setup function Max. 16 Network Cameras1.1 Getting to know the KX-HGW600 Camera Portal page11 Mbps Data Transmission via Wireless Network Fully configurable through a web browserHigh Security PPPoE Support1.1.2 System Requirements 1.2 Included Accessories IntroductionProduct AC adaptor - 1 pc1.3 Part Names 1.3.1 Front View1.3.2 Rear View 1.3.3 Indicators IntroductionProduct Operating Instructions Setup SetupSection 2.1 Configuration Types Internet Configuration-Type 1 PageLAN Intranet Configuration-Type 2 Page 2.2 Internet Configuration 2.2.1 Connecting to the Internet PreparationSetup Gateway Address Connecting the KX-HGW600 to a modem SetupEthernet jack of the modem WAN jack Ethernet cable included accessory Connecting a PC to the KX-HGW600 LAN1-4 jacks Ethernet jack Ethernet cableTurning on the Devices SetupMake sure the indicators light green Page Operating Instructions3. Fix the AC adaptor cord with the cable clamper 4. Turn on the PC connected to the KX-HGW6002.2.2 Setting up the KX-HGW600 Confirming the KX-HGW600 Setup Setup4. Click Setup Page If the Camera Portal page does not appear Page6. Click OK The Basic Setup window appears For more information about the Setup Page, please refer to PageOperating Instructions Setting up Internet Configuration Setup2. Click DHCP Connection 5. Click Restart Now Setup 2. Click Static Connection5. Click Restart Now Setup 2. Click PPPoE ConnectionInternet 3. Enter User Name and Password 5. Click Restart NowSetup 2. Click PPPoE Connection IP unnumbered3. Enter User Name and Password IP address of KX-HGW6005. Click Restart Now Confirming the Internet Configuration SetupIf a WWW site does not appear Page To modem To PC Ethernet cable Ethernet jack LAN1-4 jacksSetting up your Network Camera manually SetupKX-HGW600 Network Camera2.2.4 Viewing the Network Camera screen Image fieldSetup If the image field on the Camera Portal page does not appear2.3 LAN Intranet Configuration 2.3.1 Connecting to the LAN IntranetPreparation Connecting the KX-HGW600 to an Ethernet hub SetupWAN jack Ethernet hub Ethernet cable included accessory Connecting a PC to the KX-HGW600 Setup Turning on the DevicesMake sure the indicators light green Page Operating Instructions3. Fix the AC adaptor cord with the cable clamper 4. Turn on the PC connected to the KX-HGW6002.3.2 Setting up the KX-HGW600 Confirming the KX-HGW600 Setup Setup5. Click OK The Basic Setup window appears Operating InstructionsSetting up LAN Intranet Configuration Setup3. Enter IP Address, Subnet Mask, Gateway, DNS Server 1 and 5. Click Restart NowConfirming the LAN Intranet Configuration SetupPage Setting up your Network Camera manually Setup2.3.4 Viewing the Network Camera screen Setup If the image field on the Camera Portal page does not appearOperating Instructions Recording/Playback PlaybackRecording Section3.1 Recording/Playback 3.1.1 Preparing for recordingPlayback Recording4. Click Recording/Playback 3.1.2 Recording/Playback page FunctionsRecording/Playback SD Memory Card3.1.3 Recording PlaybackRecording 3.1.4 Recording Setup Image ResolutionInstructions for the data fields Image Quality3.1.5 Timer Recording Setup PlaybackRecording Good 3. Select Enable or Disableexample example3.1.6 Playback PlaybackRecording File Name TIMER - 2002 JAN PlaybackRecording File name and the stored place3.2 SD Memory Card 3.2.1 File Delete3.2.2 Format 3.2.3 StatusPlayback RecordingOperating Instructions System Features FeaturesSystem Section4.1 Setup Page FunctionsFeatures ConfigurationAdvanced Features System Commands4.2 Functions 4.2.1 Camera Portal4.2.2 Recording/Playback System FeaturesFor more information about the Recording window, please refer to Page 4.3 Configuration 4.3.1 Basic Setup4.3.2 Camera Setup FeaturesSystem To change the Camera NamePassword 3. Enter Camera Name and click ChangeClick Restart Now Instructions for the data fieldsFeatures SystemPassword Instructions for the data fieldsCamera Name Port NoScreen Assignment FeaturesSystem 6. Click Restart Now Instructions for the data fieldsAccess Control 2. Check None, Administrator Only or Restricted Access4. Click Restart Now Features Administrator OnlyRestricted Access To access the Camera Portal page from the WAN side5. Click Restart Now Features To access the Setup Page or Recording/Playback page from the WAN sideSystem Operating Instructions 4.3.3 Wireless Setup FeaturesSystem 2. Set SSID, Blanked SSID connection and Channel1 Channel Features High performance for wireless communicationSystem Encryption Features When you select Enabled 4064 bitSystem DecimalWhen you select Enabled 128 bit Click Restart NowFeatures Default keySystem Instructions for the data fieldsManual WEP key ExampleMAC Address Filtering FeaturesSystem 2. Check Use in the MAC Address FilteringWhen you have finished, click Save. The settings will be saved Operating Instructions3. Click Add in the Current Status table 4. Enter MAC Address and click Add4.4 Advanced Features 4.4.1 Address TranslationFeatures SystemPort Forwarding Example To set up Network Cameras manually To change the prioritySystem Features Instructions for the data fieldsEntry ProtocolNAT IP unnumbered xxx.yyy.zzz.100 xxx.yyy.zzz.101 Internet Web browserFeatures SystemPort Forwarding Example192.168.0.1 Address Translation xxx.yyy.zzz.103 Global IP address for IP Masquerade function192.168.0.2 Address Translation WAN InternetFeatures SystemInstructions for the data fields EntryNotes for NAT IP unnumbered Setup 4.4.2 Packet Filtering FeaturesSystem To add new entries4. When you have finished, click Save. The settings will be saved Operating Instructions2. Click Add in the Current Status table 3. Enter the appropriate data fields and click AddFeatures SystemTo change or delete entries 4.4.3 Optional Setup FeaturesSystem 192.168.0.113-192.168.0.128 of 128 addresses are reserved for Features SystemKX-HGW600 assigns static IP address to each device which has The default setting is Use. When static IP address is assigned ConnectionAlways AutomaticFeatures SystemMTU size Dynamic Routing4.5 System Commands 4.5.1 Change PasswordFeatures SystemOperating Instructions For assistance, please call4.5.2 Update Firmware Features If not completed, an error messageSystem 4.5.4 Factory Default Reset 4.5.3 Restart2. Click Factory Default Reset Now 2. Click Restart Now!. The KX-HGW600 restarts4.5.5 PPPoE Connection FeaturesSystem To initiate the PPPoE ConnectionKeep Alive Option 4.5.6 Ping FeaturesSystem 4.6 Information 4.6.1 Status4.6.2 Usage Data 4.6.3 Packet Filtering Log FeaturesSystem 4.6.4 User Registration 4.6.5 Support FeaturesSystem 4.6.6 Help 1. Click Help on the Setup PageOperating Instructions 2. Select the text you want to exploreTechnical Guides GuidesTechnical Section5.1 Reset procedure-default settings To initialize the KX-HGW600To restart the KX-HGW600 5.2 Wall mounting GuidesTechnical Wall template5.3 Proxy Server Setting 2. Click Tools Internet Options... Connections tab3. Click LAN Settings GuidesTechnical Confirm the Use a proxy server for your LAN check box5.4 Security on the Wireless Network 5.5 TCP/IP Properties Setup GuidesTechnical 5.6 Confirmation of private IP address It can be set freely within the range in your group5.7 PPPoE Connection IP unnumbered GuidesTechnical address of the corresponding server manually or check Use Specification and Troubleshooting TroubleshootingSpecification and Section6.1 Default setting list Troubleshooting Specification andDirection ProtocolPrevents the intrusion and leak of NBT NetBIOS over TCP/IP packet 61-646.2 Recording Duration Information TroubleshootingSpecification and 6.3 Specification The following values provide an indication of the communicationTroubleshooting Specification and6.4 Troubleshooting the KX-HGW600 is assigned an IP address from theTroubleshooting Specificationandconnected to the other wireless routers. In this case Control window. Enter the registered user name andTroubleshooting Specification andProblem Security Administrator1. Authentication and TimerTroubleshooting Specification andProblem About Other Troubles6.5 FCC and Other Information Troubleshooting Specification andMedical Operating Instructions Index Operating InstructionsPage Page For product service When you ship the productPanasonic Consumer Electronics Company Division of Matsushita Electric Corporation of America