Panasonic KX-HGW600 Setting up your Network Camera manually, Setup, Camera Name, Port No

Operating Instructions

2.Turn on the Network Camera.

3.Push CLEAR SETTING button on the Network Camera.

The Network Camera starts to communicate with the KX-HGW600 that control transmission paths on the network. After that, the Network Camera screen is registered on the Camera Portal page.

•The Automatic Setup function automatically configures the following network settings.

KX-HGW600	Port Forwarding
	Camera Entry
	Screen Assignment
Network Camera	Port No.
	IP Address
	Subnet Mask
	Default Gateway
	DNS Server Address

•The Automatic Setup function assigns each port number and IP address in the following order.

Camera Name	Port No.	IP Address
Cam 01	60001	192.168.0.113
Cam 02	60002	192.168.0.114
Cam 03	60003	192.168.0.115
•	•	•
•	•	•
•	•	•
Cam 16	60016	192.168.0.128

Setting up your Network Camera manually

•To set up your Network Camera manually, please refer to Page 75.

•To set up the specific Network Camera manually, clear Enable check box on the Network window of Network Camera ([Network] 1. Network Configuration from the Setup Program). For more information, please refer to the Network Camera’s manual.

Setup

[For assistance, please call: 1-800-272-7033] 35