Owner’s Manual
113
This time, the data in the DisCover 5’s RAM
memory are copied (saved) to the destination
disk. If all data were copied in one go, the
“Function complete” message appears and
you’re done. If only part of the data was loaded
from the source disk, the “Insert SOURCE
Protected Floppy Disk” message appears again.
In that case, go back to step (6) and continue
until the message “OK Function Complete” is
displayed.
(10)Press the [EXIT] button to return to the main
page.
There is no function for copying entire Smart-
Media cards. Use the [ALL] field to select all files
of a given type and copy them to your Smart-
Media card. See also page 109 for tips about
copying files from your computer’s hard disk to
SmartMedia. What you could do is: (a) copy the
contents of the “original” SmartMedia card to
your hard disk, and then (b) to another Smart-
Media card.