Owner’s Manual
85
Linking a MIDI Set to a User Program
MIDI Sets are “User Programs for MIDI parameters”. There are eight such memories (page 103).
If you regularly use the DisCover 5 in different MIDI
environments (studio, live, band), preparing three
MIDI Sets and linking them to the User Programs
you usually use in the studio, on stage, etc., can be a
time saver. In other situations, such a link could be
dangerous, because it would reconfigure the
DisCover 5’s MIDI parameters without you actually
knowing it.
(1) Press the [USER≈PROGRAM] field on the main
page, or the [USER≈PROGRAM] button in the
TONE/USER PROGRAM field.
If you are still on the “Song & MIDI Link” page,
skip to step (3) below.
(2) On the display page that appears now, press
the [Song≈&≈MIDI≈Link] field.
The display changes to:
(3) Press a MIDI Set [1]~[8] field to select the
desired MIDI Set.
To break the link to this MIDI Set, press its field
again (all indicator icons must be dark).
Note: Do not forget to write your User Program after
changing these settings (page 80).
(4) Press [Back≈to≈User≈Prg] to return to the User
Program selection page, or the [EXIT] button
to return to the main page.
Startup User Program
Whenever you switch on the DisCover 5, it automatically selects the “Cancel” User Program (page 81). But
maybe you prefer to be operational right away. In that case, tell the DisCover 5 which User Program it should
recall whenever you switch it on:
(1) Press the [MENU] button.
The display changes to:
(2) Press the [UTILITY] field. If the [Startup] field in
the left corner is not displayed in white, press
it.
(3) Press the [Startup≈User≈Program] field so that it
is displayed in white.
(4) Use the [VALUE] dial to select the User Pro-
gram to be recalled.
If you don’t want any User Program to be
recalled, select “Off”.
Note: You can only select internal User Programs (A11~
B88) here.
(5) Press the [EXIT] button to return to the main
page.