Owner’s Manual
79
Managing Song Chains
Song Chains can be renamed and deleted.
(1) Insert the SmartMedia™ card that contains
the chain you wish to rename or delete into
the slot.
(2) Press the [CHAIN] button.
The display looks more or less as follows:
(3) Press the field that corresponds to the chain
you need.
Use the [ø] [˚] fields to move to the previous or
next page of song chains (if available and nec-
essary).
●
Renaming a chain
To change the name of the selected chain, press
the [Rename] field.
Enter the desired characters (page 29) and
press the [Execute] field. After a brief confirma-
tion, the display returns to the Song Chain
page.
Note: You do not need to save a chain after renaming
it: this change applies to the file on SmartMedia card.
●
Deleting a chain from SmartMedia card
See steps (1)~(3) above, then press the [Delete]
field. As this may ruin your work, you need to
confirm this command:
You have three options here. Be aware that a
deleted chain cannot be recalled.
[YES] deletes the chain file (but not the Stan-
dard MIDI Files it refers to).
[NO] leaves the chain intact and takes you back
to the main page.
[CANCEL] leaves the chain intact and takes you
back to the Song Chain page, where you could
select another chain to be deleted.
Note: Even if you delete the selected chain, this “only”
disposes of the play list. The Standard MIDI Files
assigned to the chain are not deleted and can thus be
used in isolation, or assigned to new/other chains.