Roland RMP-5 , Using Tap Tempo to Set the Metronome

12
Practice
You can set the metronome tempo by playing the on-board pad or any pad connected to the EXT
TRIG IN jack.
1. Briefly hold down the [METRONOME] button.
The TAP icon appears in the display.
fig.tap.e
2. Strike the pad several times at the tempo of your choice.
The metronome’s tempo is set according to quarter note timing.
3. If you press the [START/STOP] button, the metronome starts.
4. When you decide that the tempo is correct, press the [METRONOME] button to set the
value.
The TAP icon disappears from the display.
Using Tap Tempo to Set the Metronome
TAP icon You can change the tempo
with the [+] or [-] button when
the TAP icon is showing in the
display.
RMP-5_e.book 12ページ ２００５年８月１１日 木曜日 午後２時４７分