Roland S-OPT owner manual How to Use the Power Cord Clamps, Using the POWER LINK Cable Clamp

Turning the Power On and Off

How to Use the Power Cord Clamps

Use the following procedure to secure the power plugs.

1.Insert the power cord into the AC INPUT on the rear panel.

2.Lower the power cord clamp to secure the power cord plug.

Using the POWER LINK Cable Clamp

When backing up the power supply using the POWER LINK cable (ARC-15, sold separately), prevent the cable from being unplugged by fixing it using the following procedure.

1.Remove the clamp screws (2) specified in the diagram, and remove the POWER LINK cable clamp.

2.As shown in the figure, clamp the POWER LINK cable using the cable clamp, and secure with the screws (2) removed in Step 1.

9