39
Installing the Driver
Here we will play back sample data using the standard functionality provided by your operating system. The sample
data “TTears(.mp3)” is in the included DVD-ROM.
* Copyright law prohibits you from using the song data included with this product for any purpose other than
personal enjoyment unless you have obtained permission from the copyright holder. You may not copy this data
or use it in a derivative work without permission from the copyright holder.
1. Insert the included DVD-ROM into the DVD-ROM drive of your computer.
2. From the Sample folder of the DVD-ROM, copy the file TTears(.mp3) to your desktop.
3. Play back the sample data “TTears”(.mp3).
Double-click the TTears(.mp3) file you copied to your desktop.
If you’re using Windows, Windows Media Player will start. If you’re using Macintosh, iTunes will start. Click the play
button, and the sample data will start playing.
* Depending on your system, other playback software may start up. If so, play the sample data as described in the
documentation for the software you’re using.
4. Adjust the volume.
Use the SD-50’s [VOLUME] dial to adjust the volume.
You should hear the sample data played from the headphones or speakers connected to the SD-50.
Playing Back the Sample Data

Did you hear the sample data?

If you could hear the sample data, the SD-50 is correctly connected to your computer and the driver has
been installed correctly.
If you could not hear the sample data, refer to “Troubleshooting” (p. 88). If there’s no sound, or if there’s
something wrong with the playback, information provided in that section will help you solve the
problem.
SD-50_e.book 39 ページ ２０１０年１月２５日　月曜日　午前１０時５２分