86
Reinstalling the Driver
If a problem occurred while installing the driver, use the following procedure to reinstall it.
1. Uninstall the SD-50 driver as described in “Removing the driver.”
2. Install the driver once again as described in “Installing the Driver” (p. 23).
Your computer may fail to correctly recognize the SD-50 if the driver could not be installed according to the specified
procedure. If so, use the following procedure to remove the driver, and then install the driver once again according to
the procedure given in “Installing the Driver” (p. 23).
* The displayed content may differ depending on your system.
1. Start up Windows with the SD-50 disconnected.
Make sure that all USB cables other than those for a USB keyboard and USB mouse (if used) are disconnected.
Log on using a user name whose account type is computer administrator (such as Administrator).
2. Insert the included Mobile Studio Canvas DVD-ROM into your computer’s DVD-ROM drive.
3. On the DVD-ROM, navigate to the following folder and double-click [Uninstal].
4. If a user account control message appears, click [Yes] or [Continue].
5. The screen will indicate “The installed SD-50 Driver will be uninstalled.” Click [OK].
If any other message appears, proceed as directed by the message.
6. The screen will indicate “Uninstallation was completed.” Click [OK] to restart Windows.

Removing the Driver

Windows Users

OS Folder
Windows 7 Open the folders [Driver] and then [Win7]
Windows 7 64-bit edition Open the folders [x64Driver] and then [Win7]
Windows Vista Open the folders [Driver] and then [Vista]
Windows Vista 64-bit edition Open the folders [x64Driver] and then [Vista]
Windows XP Open the folders [Driver] and then [XP]
SD-50_e.book 86 ページ ２０１０年１月２５日　月曜日　午前１０時５２分