52

Using the SD-50 as a MIDI Sound Module

Here’s how to adjust the effect settings and other settings of the studio set.
1. Press the [PART] button a number of times to access the Studio Set Edit screen.
page_studio_edit.eps
2. Turn the [VALUE] dial to select the item you want to edit, and then press the [ENTER] button.
page_studio_edit-2.eps
Adjusting the Effect Settings
Setting Value Explanation
Rev Type
SMALL ROOM,
MEDIUM ROOM,
LARGE ROOM,
MEDIUM HALL,
LARGE HALL,
PLATE
SMALL ROOM, MEDIUM ROOM, LARGE ROOM:
Reverb simulating the acoustics of a room, producing a crisp and spacious
reverberation.
MEDIUM HALL, LARGE HALL:
Reverb simulating the acoustics of a hall, producing reverberation with more space
than Room.
PLATE: Simulation of a plate reverb unit (a device using the vibration of a metal plate).
Rev Time 0–127 Adjusts the duration of the reverb. Higher settings produce longer reverb.
Cho mode CHORUS, DELAY Selects either Chorus or Reverb.
When “CHORUS” has been selected for “Cho mode.”
Cho Type
CHORUS1, CHORUS2,
CHORUS3, CHORUS4,
FB CHORUS, FLANGER
CHORUS1, CHORUS2, CHORUS3, CHORUS4:
Typical chorus effect, adding depth and spaciousness to the sound.
FB CHORUS: Chorus effect that produces a soft, flanger-like sound.
FLANGER: Produces a sound that’s reminiscent of a jet airplane taking off and landing.
Cho Rate 0–127 Chorus with feedback applied to it.
Cho Depth 0–127 Adjusts the rate of modulation.
Feedback 0–127 Adjusts the depth of modulation.
Rev Send 0–127 Adjusts the amount of chorus sound to be fed back into the input.
When “DELAY” has been selected for “Cho mode.”
Dly Time 0–1000 ms, note Adjusts the amount of time it is to take for the delay sound to be heard after the
original sound has sounded.
Dly FB -98– +98 % Adjusts the proportion of the delay sound to be fed back to the input. (Minus:
reversed phase)
Dly HF DMP 200– 8000 Hz, BYPASS Adjusts the frequency at which the high-frequency components of the delay sound
fed back to the input will be cut. (BYPASS: no cut)
SD-50_e.book 52 ページ 2010年1月25日 月曜日 午前10時52分