PD-6 (Pad)
Stand Fixing Screw
Holder
Head
Stand Fixing Screw
Holder
Output Jack
Attaching the PD-6 to a Stand
Pass the rod through the pipe that is inside the holder.
Tighten
Loosen
Rod
When attaching the
Specifications
| Pad |
Pad Size: | 8.5 inches |
Trigger: | 1 (Head) |
Dimensions: | 221 (W) x 274 (D) x 64 (H) mm |
| |
Weight: | 1.2 kg / 2 lbs 11 oz |
CY-6 (Cymbal Pad)
Bow Portion
Pad Face
Edge Portion
Output Jack
Attaching the CY-6 to a Cymbal Mount
1.Use the included tuning key to tighten the stopper bolt.
The stopper keeps the cymbal pad from turning, and prevents the cables from catching or getting tangled on the stand.
| Stopper |
Tighten the bolt with | (Be sure to |
the included tuning key. | orient it correctly) |
2.Attach the CY-6 so the unit is oriented as shown in the diagram.
3.Tighten the wing nut to obtain the desired movement.
Use the included felt washer and the wing nut.
Wing nut
Felt washer
Specifications
| Cymbal Pad |
Pad Size: | 12 inches |
Triggers: | 2 (Bow, Edge) |
Dimensions: | 290 (W) x 295 (D) x 45 (H) mm |
| |
Weight: | 0.6 kg / 1 lb 6 oz |
6