82
Chapter 7 Other Functions

To save any changes you’ve made in the settings, you need to
perform the write procedure.
To make a copy of an existing patch, you can simply write it to
another patch location.

1.

Press [WRITE].

The PATCH WRITE screen appears.
“WRITE TO” is displayed, and the write-destination patch
number and name are indicated.

2.

Use the PATCH/VALUE dial to select the copy-
destination patch.

3.

Press [WRITE] again.

The message “NOW WRITING...” is displayed as the patch is
copied, and the VB-99 changes to the copy-destination patch
number.

* If you are not saving the settings, press [EXIT] to return to the Play
screen.

This exchanges the user patch with the different patch.

* You cannot exchange tones in preset patches.

1.

Confirm that a User patch is selected.

2.

Press [WRITE].

3.

Press PAGE [ ] to go to Page 2.

“EXCHANGE” is displayed.
The exchange-destination patch number and name are
indicated.

4.

Use the PATCH/VALUE dial to select the
exchange-destination patch.

5.

Press [WRITE] again.

The message “NOW EXCHANGING...” is displayed as the
current patch and the selected patch are exchanged, and the VB-
99 changes to the exchange-destination patch number.

* If you do not want to exchange the patches, press [EXIT] to return to
the Play screen.

Managing the Patches

Saving and Copying Patches

(PATCH WRITE)

Exchanging the Current Patch

with a Different Patch (PATCH

EXCHANGE)

VB-99_e.book 82 ページ ２００８年８月１８日　月曜日　午後１時１０分