27
Chapter 4
Chapter 4. Creating sounds — advanced section

COSM GUITAR settings

Here’s how to make COSM Guitar settings. You can adjust any of these settings to achieve the desired sound.
1. Press [COSM GUITAR].
fig.4-01
fig.4-02
2. Press [F1] (ON/OFF) to switch COSM GUITAR on or off.
* You can also turn [VALUE] to switch this on or off.
3. Press [F4] (TYPE), and use [VALUE] to select the COSM
GUITAR type.
“COSM GUITAR — TYPE” (p. 36)
•VARI GT •ACOUSTIC •
NYLON STRINGS
•OPEN TUNE •12STRINGS •PD SHIFT
•POLY DIST •POLY COMP •POLY OCT
•POLY SG •BOWED •DUAL
•FILTER-BASS •PIPE •SOLO
•PWM •CRYSTAL •ORGAN
•BRASS
4. Press [PAGE ].
* Pages 2 and following are the sections that determine the tone
of the [COSM GUITAR]. Each time you press [PAGE ],
you will move to the screen containing the next group of
parameters. You can also move to the next group of parameters
by pressing [COSM GUITAR].
5. Turn [VALUE] to select either “ON/OFF” or “PRESET”
in each group.
fig.4-02a
fig.4-02b
6. If you wish to edit the parameters within a group in
further detail, press “EDIT” to move to their edit screen.
7. Press [F1]–[F6] for the parameter that you wish to adjust,
and use [VALUE] to select the desired value for the
parameter.
8. Adjust parameters until you achieve the sound you
want.
9. When you have finished making settings, perform the
Write operation (p. 25) if you wish to save the newly
created sound.
*If you do not wish to save the sound, press [EXIT] to return to
Play page.