Rolls MX902 NOTE Do not use a mono 1/4” TS plug in this jack. Doing so may result, Front Panel

Front Panel

CHANNEL DESCRIPTIONS
HIGH: Boosts or cuts the 12.5 kHz or high frequency portion of the signal.
LOW: Boosts or cuts the 60 Hz or low frequency portion of the signal.
AUX 2: Controls the amount of post-fader signal that is sent to the Aux 2 bus	-15	12.5 k	+15	-15	12.5 k	+15
and output.		HIGH			HIGH
AUX 1: Controls the amount of pre-fader signal that is sent to the Aux 1 bus
and output.	-15	60	+15	-15	60	+15
		LOW			LOW
PAN: Varies the amount of relative signal sent from Channels’ 1 through 3 to	0	AUX 2	10	0	AUX 2	10
the Main Level control.
BAL: Varies the amount of stereo signal from channels 5/6 through 8/9 to the	0	AUX 1	10	0	AUX 1	10
Main Level control.
	L	PAN	R	L	BAL	R
LEVEL: Controls the overall output signal level of the channel.
	-OO	LEVEL	+15	-OO		+15
					LEVEL
		3			4/5
MASTER DESCRIPTIONS
AUX 2 RETURN: Controls the amount of input signal from the RCA Aux 2 Return			CLIP L		R PWR
jacks.
AUX 1 RETURN: Controls the amount of input signal from the Aux 1 Right and Left			L		12 - 18 VDC
Return jacks.
						+
				AUX 2 RET		-
			R		POWER
HEADPHONE LEVEL: Controls the amount of level of signal from the Headphone				MX902
Output.
HEADPHONE OUTPUT: 1/4” TRS stereo jack for connection to stereo headphones.			0	AUX 2	10
NOTE: Do not use a mono 1/4” TS plug in this jack. Doing so may result				RETURN
in serious damage to the MX902.			0	AUX 1	10
						HDPHN
				RETURN
						OUT
MAIN LEVEL: Controls the amount of signal sent to the Right/Left output jacks.
			-OO LEVEL +15
				HDPHN
			-OO		+15
				LEVEL
			MAIN
						2