Jack Panel Description
MIC 1 |
|
|
| MIC 2 |
|
|
|
|
|
TRIM | TRIM | ||||||
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
+6 dB +50 | +6 dB +50 | ||||||
LINE 1 | LINE 2 | ||||||
MIC 3 | PHANTOM | AUX 1 | |
| SEND | ||
| PWR |
| |
| 4/LEFT/MONO | ||
TRIM |
|
| |
+6 dB +50 |
|
| |
LINE 3 | 5/RIGHT | ||
|
| ||
AUX 2
SEND
6/LEFT/MONO
7/RIGHT
LEFT OUT
8/LEFT/MONO
9/RIGHT
RIGHT OUT
AUX 1
RET LEFT/MONO
AUX 1
RET RIGHT
Channels 1 through 3
MIC INPUT: XLR input jack for microphone level or balanced signals.
TRIM: Controls the amount of input gain from +6 to +50 dB.
LINE: 1/4” unbalanced input for instrument of line level signals.
PHANTOM POWER SWITCH: Engages the +24 volts of phantom power, used to power con- denser microphones.
Channels 4/5 through 8/9
LEFT: 1/4” unbalanced input for instrument or line level signals.
RIGHT: 1/4” unbalanced input for instrument or line level signals.
Master
AUX 1 and 2 SEND: 1/4” unbalanced jacks for sending out the signals present on the Aux 1 and 2 buses.
RIGHT OUT: 1/4” TRS balanced main right output.
LEFT OUT: 1/4” TRS balanced main left output.
AUX 1 RET. RIGHT and LEFT: 1/4” unbalanced jacks for receiving stereo signals sent from the Aux 1 bus (usually through an effects processor).
AUX 2 RET. Stereo RCA jacks for receiving stereo signals send from the Aux 2 bus, or may be used as an auxiliary stereo source input such as a CD or cassette player.
Side Panel
12 - 18 VDC: For connection to a sleeve positive, DC power adapter.
POWER Switch: Applies power to the MX902 when connected to a proper power source.
3
